This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.
jenkins at lists.osmocom.org jenkins at lists.osmocom.orgSee <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a2=default,a3=default,a4=default,label=simtester/792/display/redirect> Changes: ------------------------------------------ [...truncated 38.75 KB...] -Done! Test 05_ki.sh FAILED! ==> Executing Testcase 06_seq.sh --- 06_seq.out 2020-09-10 22:52:50.107745872 +0200 +++ /tmp/filezFzZJ3 2020-09-12 15:46:33.762570642 +0200 @@ -8,51 +8,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading Milenage Sequence parameters... - * Initalizing... - * Current SQN Configuration for ADF_USIM: - IND (bits): 5 - SQN Check enabled - SQN Age Limit disabled - SQN Max Delta enabled - SQN Skip first enabled - SQN Conceal AUTN enabled - SQN Conceal AUTS enabled - SQN No AMF clear disabled - Max Delta: 8589934592 - Age Limit: 8589934592 - Freshness Data: - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000 - * Current SQN Configuration for ADF_ISIM: - IND (bits): 5 - SQN Check enabled - SQN Age Limit disabled - SQN Max Delta enabled - SQN Skip first enabled - SQN Conceal AUTN enabled - SQN Conceal AUTS enabled - SQN No AMF clear disabled - Max Delta: 8589934592 - Age Limit: 8589934592 - Freshness Data: - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000 + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH @@ -63,13 +26,11 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - - * Resetting SQN Configuration to defaults... - * Initalizing... - * Resetting... + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 06_seq.sh FAILED! ==> Executing Testcase 07_mnclen.sh --- 07_mnclen.out 2020-09-10 22:52:50.107745872 +0200 +++ /tmp/filezFzZJ3 2020-09-12 15:46:41.430663737 +0200 @@ -8,18 +8,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH @@ -30,18 +26,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH @@ -52,18 +44,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x03 - * Programming... + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH @@ -74,18 +62,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x03 + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH @@ -96,18 +80,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH @@ -118,15 +98,11 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 0 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 07_mnclen.sh FAILED! Summary: 7 Tests failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE