Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #8431

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Fri Dec 6 13:27:12 UTC 2019


See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9/8431/display/redirect?page=changes>

Changes:

[Oliver Smith] doc: osmux: use generated svg instead of pychart

------------------------------------------
[...truncated 563.96 KB...]
  channel-description bs-ag-blks-res 1
  no access-control-class-ramping
  access-control-class-ramping-step-interval dynamic
  access-control-class-ramping-step-size 1
  early-classmark-sending forbidden
  early-classmark-sending-3g allowed
  ipa unit-id 1800 0
  oml ipa stream-id 255 line 0
  neighbor-list mode automatic
  codec-support fr hr efr amr
  amr tch-f modes 0 2 4 7
  amr tch-f threshold ms 32 32 32
  amr tch-f hysteresis ms 8 8 8
  amr tch-f threshold bts 32 32 32
  amr tch-f hysteresis bts 8 8 8
  amr tch-f start-mode auto
  amr tch-h modes 0 2 4
  amr tch-h threshold ms 32 32
  amr tch-h hysteresis ms 8 8
  amr tch-h threshold bts 32 32
  amr tch-h hysteresis bts 8 8
  amr tch-h start-mode auto
  gprs mode none
  trx 0
   rf_locked 0
   arfcn 868
   nominal power 23
   max_power_red 0
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH+SDCCH4
    hopping enabled 0
   timeslot 1
    phys_chan_config SDCCH8
    hopping enabled 0
   timeslot 2
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 3
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 4
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 5
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 6
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 7
    phys_chan_config TCH/F
    hopping enabled 0
msc 0
 ip.access rtp-base 4000
 no bsc-welcome-text
 no bsc-msc-lost-text
 no bsc-grace-text
 codec-list hr3
 type normal
 allow-emergency deny
 amr-config 12_2k forbidden
 amr-config 10_2k forbidden
 amr-config 7_95k forbidden
 amr-config 7_40k forbidden
 amr-config 6_70k forbidden
 amr-config 5_90k allowed
 amr-config 5_15k forbidden
 amr-config 4_75k forbidden
 amr-payload octet-aligned
 asp-protocol m3ua
 lcls-mode disabled
 lcls-codec-mismatch forbidden
bsc
 mid-call-timeout 0
 no missing-msc-text
cbc
 no remote-ip
 no listen-port
end
<0004> bsc_init.c:52 shutting down OML for BTS 0
signal 15 received
Terminating took 2.679s

RESULTS:
pass: ./handover_cfg.vty
pass: ./neighbor_ident.vty
pass: ./osmo-bsc.vty

make[6]: Leaving directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'

> ls -l /proc/12178/fd
total 0
lr-x------ 1 build build 64 Dec  6 13:27 0 -> pipe:[3016138066]
l-wx------ 1 build build 64 Dec  6 13:27 1 -> pipe:[3016138067]
l-wx------ 1 build build 64 Dec  6 13:27 2 -> pipe:[3016138068]
l-wx------ 1 build build 64 Dec  6 13:27 3 -> /dev/null


> ss -tn
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              


> ss -tln
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              


> ps xua | grep osmo
build    12178  0.0  0.0  53724 20744 ?        S    13:27   0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build    12179  0.0  0.0 21474979752 23540 ?   R    13:27   0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build    12186  0.0  0.0   4276   708 ?        S    13:27   0:00 /bin/sh -c ps xua | grep osmo
build    12188  0.0  0.0   4276    88 ?        R    13:27   0:00 /bin/sh -c ps xua | grep osmo

ERROR
test_terminal_length (__main__.TestVTY) ... Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 36998), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 36998), raddr=('127.0.0.1', 4242)> (0 sockets open)
Terminating took 2.679s
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'

> ls -l /proc/12178/fd
total 0
lr-x------ 1 build build 64 Dec  6 13:27 0 -> pipe:[3016138066]
l-wx------ 1 build build 64 Dec  6 13:27 1 -> pipe:[3016138067]
l-wx------ 1 build build 64 Dec  6 13:27 2 -> pipe:[3016138068]
l-wx------ 1 build build 64 Dec  6 13:27 3 -> /dev/null


> ss -tn
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              


> ss -tln
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              


> ps xua | grep osmo
build    12178  3.5  0.0  53980 20928 ?        S    13:27   0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build    12190  0.0  0.0 21474979732 22024 ?   R    13:27   0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build    12197  0.0  0.0   4276   796 ?        S    13:27   0:00 /bin/sh -c ps xua | grep osmo
build    12199  0.0  0.0  12780  1016 ?        S    13:27   0:00 grep osmo

ERROR
test_unknown_command (__main__.TestVTY) ... Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 37012), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 37012), raddr=('127.0.0.1', 4242)> (0 sockets open)
Terminating took 2.679s
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'

> ls -l /proc/12178/fd
total 0
lr-x------ 1 build build 64 Dec  6 13:27 0 -> pipe:[3016138066]
l-wx------ 1 build build 64 Dec  6 13:27 1 -> pipe:[3016138067]
l-wx------ 1 build build 64 Dec  6 13:27 2 -> pipe:[3016138068]
l-wx------ 1 build build 64 Dec  6 13:27 3 -> /dev/null


> ss -tn
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              


> ss -tln
State      Recv-Q Send-Q Local Address:Port               Peer Address:Port              


> ps xua | grep osmo
build    12178  2.1  0.0  53980 20932 ?        S    13:27   0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build    12201  0.0  0.0 21474979208 20188 ?   R    13:27   0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build    12208  0.0  0.0   4276   736 ?        S    13:27   0:00 /bin/sh -c ps xua | grep osmo
build    12210  0.0  0.0   4276    88 ?        R    13:27   0:00 /bin/sh -c ps xua | grep osmo

Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 37034), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 37034), raddr=('127.0.0.1', 4242)> (0 sockets open)
Terminating took 2.679s
ERROR

======================================================================
ERROR: test_history (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py", line 55, in test_history
    self.vty.command(t1)
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 222, in command
    return self._common_command(request, close)
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 178, in _common_command
    self.socket.send("%s\r" % request)
TypeError: a bytes-like object is required, not 'str'

======================================================================
ERROR: test_terminal_length (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py", line 65, in test_terminal_length
    assert(self.vty.verify(test_str, ['']))
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 244, in verify
    res = self.command(command, close).split('\r\n')
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 222, in command
    return self._common_command(request, close)
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 178, in _common_command
    self.socket.send("%s\r" % request)
TypeError: a bytes-like object is required, not 'str'

======================================================================
ERROR: test_unknown_command (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py", line 61, in test_unknown_command
    assert(self.vty.verify(test_str, ['% Unknown command.']))
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 244, in verify
    res = self.command(command, close).split('\r\n')
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 222, in command
    return self._common_command(request, close)
  File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 178, in _common_command
    self.socket.send("%s\r" % request)
TypeError: a bytes-like object is required, not 'str'

----------------------------------------------------------------------
Ran 3 tests in 10.556s

FAILED (errors=3)
Makefile:698: recipe for target 'python-tests' failed
make[5]: Leaving directory '/build/tests'
make[5]: *** [python-tests] Error 3
make[4]: *** [check-local] Error 2
Makefile:717: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
Makefile:558: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
make[2]: *** [check-recursive] Error 1
Makefile:410: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[1]: *** [check-recursive] Error 1
Makefile:448: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:739: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE



More information about the jenkins-notifications mailing list