This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Tomcsányi, Domonkos domi at tomcsanyi.netAs far as I remember the calypso-trx code was capable of receiving multiple timeslots, maybe check out that code (jolly/trx if I'm right) and watch Sylvain's talk about it. https://youtu.be/B1od4x9L3t4 Cheers, Domi 2016. okt. 26. dátummal, 8:40 időpontban robert <robert.steve07 at gmail.com> írta: > Hi, > > On Oct 26, 2016, at 8:10 AM, Sylvain Munaut <246tnt at gmail.com> wrote: > >>> Thanks for explaining. I couldn’t find a way to decide which ts to choose so I thought about having multiple ts at the same time. >>> So I understand that I should stick with only one ts. >> >> Which TS to listen on for paging message will be dependent on the >> paging group your sim card is in. It's a formula that's based on your >> IMSI and the cell configuration. It's described somewhere in the spec, >> GSM 04.08 should have at least reference to it if you search for >> "paging group”. >> > Yes I understand, my problem is in modifying the osmocombb code so that it listens to other TS. I have tried to change the code to make it work but with no success. I only need some instructions on where to start and what should be done. > > Best regards, > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20161026/b0b872b1/attachment.htm>