This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
etienne . etiennehelluy at gmail.comShort answer: no & no 1 - A gsm repeater is an analog device. With osmocom-bb phones you would need to demodulate/remodulate bursts. This will mess with timing advance, and you won't be able to send bursts in the same frame/timeslot they were received. 2 - Calypso don't/won't support 3G. Regards On Mon, May 23, 2016 at 4:21 PM, Craig Comstock <craig_comstock at yahoo.com> wrote: > The place where I normally play with osmocom-bb has pretty bad 2G coverage > and I was wondering if I could make a signal booster/repeater with a couple > of osmocom phones? > > Also wondering if 3G would require totally different hardware than the old > Calypso motorola phones or if it could be achieved with firmware+DSP > changes? > > I have a 3G cell spot that boost that signal so just trying to find a way > to make an osmocom-bb phone work well in my place. > > Thanks, > Craig > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20160523/5d245a0d/attachment.htm>