trouble loading trx-firmware

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.

Mehrin Javed mehrinjaved at gmail.com
Fri Mar 1 15:07:15 UTC 2013


Try the command
sudo ldconfig
and then load binary on your phone.

On Thursday, February 28, 2013, Erich Dachleger wrote:

> Thanks for the answers.
>  It was the spaces between  "../ ../"  and the first commandline that was
> the errorcause.
> erich
>
> On Thu, Feb 28, 2013 at 1:01 PM, Erich Dachleger <edachleger at yahoo.com>
> wrote:
> >  ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../
> > ../target/firmware/board/compal_e88/trx.compalram.bin ../
> > ../target/firmware/board/compal_e88/chainload.highram.bin
>
> If I am not wrong, compalram image should be loaded as argument, while
> highram image should be passed to -c, so this command is wrong.
>
> > I also tried switching highram-compalram:
> > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../
> > ../target/firmware/board/compal_e88/trx.highram.bin ../
> > ../target/firmware/board/compal_e88/chainload.compalram.bin
> >
>
> That should be right: you're loading the chainloader that loads the
> trx. This looks like the command I used to load the TRX. But if you're
> getting the message "no such file" you're probably pointing to the
> wrong file names. Do an "ls" from the dir you're running the code to
> be sure you're pointing to right files.
>
> Last but not least: insist. Firmwares in my phones never load at the first
> try.
> Dario.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20130301/f8e24ecd/attachment.htm>


More information about the baseband-devel mailing list