This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Dario Lombardo dario.lombardo.ml at gmail.comHave a look at this old thread http://lists.osmocom.org/pipermail/baseband-devel/2012-January/002690.html that goes through the topic. At a first glance you're issuing the right commands, but you can try the alternative suggested way (osmoload jump). Sometimes I must reload the firmware many times before it starts (freeze after handle_write() finished). Bye Dario. On Fri, Oct 5, 2012 at 8:15 PM, ☎ <Max.Suraev at fairwaves.ru> wrote: > 05.10.2012 19:18, Steve Markgraf пишет: > >> >>> I've disabled size check in src/host/osmocon/osmocon.c:270 and recompiled latest git. > > Btw, do I actually have to do that? > >> Hm, strange. Did you try -m c123? Does loading other apps without >> chainloader work? > > if I use -m c123 than loading proceed up to "handle_write(): finished" but I do not > see rssi (or anything at all) on phone's screen. > > And ./osmocom-bb/src/host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor > ./osmocom-bb/src/target/firmware/board/compal_e88/layer1.compalram.bin > loads firmware just fine. > > Am I using the right images (rssi.highram.bin and chainload.compalram.bin)? > > -- > best regards, > Max, http://fairwaves.ru >