This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Denis 'GNUtoo' Carikli GNUtoo at no-log.orgSigned-off-by: Denis 'GNUtoo' Carikli <GNUtoo at no-log.org> --- nuttx/configs/compal_e99/nsh_highram/ld.script | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/nuttx/configs/compal_e99/nsh_highram/ld.script b/nuttx/configs/compal_e99/nsh_highram/ld.script index 7096a61..34ce015 100644 --- a/nuttx/configs/compal_e99/nsh_highram/ld.script +++ b/nuttx/configs/compal_e99/nsh_highram/ld.script @@ -16,7 +16,7 @@ MEMORY LRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x00020000 TRAM (rw) : ORIGIN = 0x00820000, LENGTH = 0x00020000 /* compal-loaded binary: our unitialized data, stacks, heap */ - IRAM (rw) : ORIGIN = 0x00840000, LENGTH = 0x00010000 + IRAM (rw) : ORIGIN = 0x01000000, LENGTH = 0x011fffff } SECTIONS { -- 1.7.5.4 --nextPart2762333.I70qBvf3Po Content-Disposition: attachment; filename="appconfig" Content-Transfer-Encoding: 7Bit Content-Type: text/x-matlab; charset="UTF-8"; name="appconfig" ############################################################################ # configs/compal_e99/nsh_highram/appconfig # # Copyright (C) 2011 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey at racsa.co.cr> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # NSH shell CONFIGURED_APPS += examples/nsh CONFIGURED_APPS += system/readline CONFIGURED_APPS += nshlib # Path to example in apps/examples #CONFIGURED_APPS += examples/hello CONFIGURED_APPS += vsn/poweroff #CONFIGURED_APPS += examples/ostest CONFIGURED_APPS += examples/nxtext #CONFIGURED_APPS += examples/nxhello #CONFIGURED_APPS += examples/nxlines #CONFIGURED_APPS += examples/nximage --nextPart2762333.I70qBvf3Po Content-Disposition: attachment; filename="defconfig" Content-Transfer-Encoding: 7Bit Content-Type: text/x-matlab; charset="UTF-8"; name="defconfig" ############################################################################ # configs/compal_e99/nsh_highram/defconfig # # Copyright (C) 2007-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt at nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # # architecture selection # # CONFIG_ARCH - identifies the arch subdirectory and, hence, the # processor architecture. # CONFIG_ARCH_family - for use in C code. This identifies the # particular chip family that the architecture is implemented # in. # CONFIG_ARCH_architecture - for use in C code. This identifies the # specific architecture within the chip familyl. # CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory # CONFIG_ARCH_CHIP_name - For use in C code # CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, # the board that supports the particular chip or SoC. # CONFIG_ARCH_BOARD_name - for use in C code # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 # CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be # used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM7TDMI=y CONFIG_ARCH_CHIP=calypso CONFIG_ARCH_CHIP_CALYPSO=y CONFIG_ARCH_BOARD=compal_e99 CONFIG_ARCH_BOARD_COMPALE99=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_DRAM_END=0x00840000 CONFIG_ARCH_LEDS=n CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y # # C5471 specific device driver settings # # CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the # console ant ttys0 (default is the modem UART). # CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control # CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received. # This specific the size of the receive buffer # CONFIG_UART_*_TXBUFSIZE - Characters are buffered before # being sent. This specific the size of the transmit buffer # CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be # CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8. # CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity # CONFIG_UART_*_2STOP - Two stop bits # CONFIG_SERIAL_IRDA_CONSOLE=n CONFIG_UART_IRDA_HWFLOWCONTROL=n CONFIG_UART_MODEM_HWFLOWCONTROL=n CONFIG_UART_IRDA_RXBUFSIZE=256 CONFIG_UART_MODEM_RXBUFSIZE=256 CONFIG_UART_IRDA_TXBUFSIZE=256 CONFIG_UART_MODEM_TXBUFSIZE=256 CONFIG_UART_IRDA_BAUD=115200 CONFIG_UART_MODEM_BAUD=115200 CONFIG_UART_IRDA_BITS=8 CONFIG_UART_MODEM_BITS=8 CONFIG_UART_IRDA_PARITY=0 CONFIG_UART_MODEM_PARITY=0 CONFIG_UART_IRDA_2STOP=0 CONFIG_UART_MODEM_2STOP=0 # # C5471 Ethernet Driver settings CONFIG_C5471_NET_STATS=n ETHERNET_PHY_LU3X31T_T64=1 ETHERNET_PHY_AC101L=2 CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64 CONFIG_NET_C5471_AUTONEGOTIATION=y CONFIG_NET_C5471_BASET100=n CONFIG_NET_C5471_BASET10=n # # General build options # # CONFIG_RRLOAD_BINARY - make the rrload binary format used with # BSPs from www.ridgerun.com using the tools/mkimage.sh script # CONFIG_INTELHEX_BINARY - make the Intel HEX binary format # used with many different loaders using the GNU objcopy program # Should not be selected if you are not using the GNU toolchain. # CONFIG_RAW_BINARY - make a raw binary format file used with many # different loaders using the GNU objcopy program. This option # should not be selected if you are not using the GNU toolchain. # CONFIG_HAVE_LIBM - toolchain supports libm.a # CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=n CONFIG_RAW_BINARY=y CONFIG_HAVE_LIBM=n # # General OS setup # # CONFIG_APPS_DIR - Identifies the relative path to the directory # that builds the application to link with NuttX. Default: ../apps # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with # debug symbols (needed for use with a debugger). # CONFIG_MM_REGIONS - If the architecture includes multiple # regions of memory to allocate from, this specifies the # number of memory regions that the memory manager must # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz # or TICKS_PER_MSEC=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. # CONFIG_RR_INTERVAL - The round robin timeslice will be set # this number of milliseconds; Round robin scheduling can # be disabled by setting this value to zero. # CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in # scheduler to monitor system performance # CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a # task name to save in the TCB. Useful if scheduler # instrumentation is selected. Set to zero to disable. # CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - # Used to initialize the internal time logic. # CONFIG_JULIAN_TIME - Enables Julian time conversions # CONFIG_DEV_CONSOLE - Set if architecture-specific logic # provides /dev/console. Enables stdout, stderr, stdin. # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console # driver (minimul support) # CONFIG_MUTEX_TYPES: Set to enable support for recursive and # errorcheck mutexes. Enables pthread_mutexattr_settype(). # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority # inheritance on mutexes and semaphores. # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority # inheritance is enabled. It defines the maximum number of # different threads (minus one) that can take counts on a # semaphore with priority inheritance support. This may be # set to zero if priority inheritance is disabled OR if you # are only using semaphores as mutexes (only one holder) OR # if no more than two threads participate using a counting # semaphore. # CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, # then this setting is the maximum number of higher priority # threads (minus 1) than can be waiting for another thread # to release a count on a semaphore. This value may be set # to zero if no more than one thread is expected to wait for # a semaphore. # CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors # by task_create() when a new task is started. If set, all # files/drivers will appear to be closed in the new task. # CONFIG_FDCLONE_STDIO. Disable cloning of all but the first # three file descriptors (stdin, stdout, stderr) by task_create() # when a new task is started. If set, all files/drivers will # appear to be closed in the new task except for stdin, stdout, # and stderr. # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # CONFIG_NXFLAT. Enable support for the NXFLAT binary format. # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # #CONFIG_APPS_DIR= CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n CONFIG_MM_REGIONS=2 CONFIG_ARCH_LOWPUTC=y CONFIG_RR_INTERVAL=200 CONFIG_SCHED_INSTRUMENTATION=n CONFIG_TASK_NAME_SIZE=0 CONFIG_START_YEAR=2007 CONFIG_START_MONTH=2 CONFIG_START_DAY=13 CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y CONFIG_DEV_LOWCONSOLE=n CONFIG_MUTEX_TYPES=n CONFIG_PRIORITY_INHERITANCE=n CONFIG_SEM_PREALLOCHOLDERS=0 CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y CONFIG_NXFLAT=n # # The following can be used to disable categories of # APIs supported by the OS. If the compiler supports # weak functions, then it should not be necessary to # disable functions unless you want to restrict usage # of those APIs. # # There are certain dependency relationships in these # features. # # o mq_notify logic depends on signals to awaken tasks # waiting for queues to become full or empty. # o pthread_condtimedwait() depends on signals to wake # up waiting tasks. # CONFIG_DISABLE_CLOCK=n CONFIG_DISABLE_POSIX_TIMERS=n CONFIG_DISABLE_PTHREAD=n CONFIG_DISABLE_SIGNALS=n CONFIG_DISABLE_MQUEUE=y CONFIG_DISABLE_MOUNTPOINT=n CONFIG_DISABLE_ENVIRON=n CONFIG_STDIO_LINE_BUFFER=y CONFIG_DISABLE_POLL=y # # FAT filesystem configuration # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size # CONFIG_FS_ROMFS - Enable ROMFS filesystem support CONFIG_FS_FAT=n CONFIG_FS_ROMFS=n # # Misc libc settings # # CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a # little smaller if we do not support fieldwidthes # CONFIG_NOPRINTF_FIELDWIDTH=n # # Allow for architecture optimized implementations # # The architecture can provide optimized versions of the # following to improve sysem performance # CONFIG_ARCH_MEMCPY=n CONFIG_ARCH_MEMCMP=n CONFIG_ARCH_MEMMOVE=n CONFIG_ARCH_MEMSET=n CONFIG_ARCH_STRCMP=n CONFIG_ARCH_STRCPY=n CONFIG_ARCH_STRNCPY=n CONFIG_ARCH_STRLEN=n CONFIG_ARCH_STRNLEN=n CONFIG_ARCH_BZERO=n # # Sizes of configurable things (0 disables) # # CONFIG_MAX_TASKS - The maximum number of simultaneously # active tasks. This value must be a power of two. # CONFIG_MAX_TASK_ARGS - This controls the maximum number of # of parameters that a task may receive (i.e., maxmum value # of 'argc') # CONFIG_NPTHREAD_KEYS - The number of items of thread- # specific data that can be retained # CONFIG_NFILE_DESCRIPTORS - The maximum number of file # descriptors (one for each open) # CONFIG_NFILE_STREAMS - The maximum number of streams that # can be fopen'ed # CONFIG_NAME_MAX - The maximum size of a file name. # CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate # on fopen. (Only if CONFIG_NFILE_STREAMS > 0) # CONFIG_NUNGET_CHARS - Number of characters that can be # buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) # CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message # structures. The system manages a pool of preallocated # message structures to minimize dynamic allocations # CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with # a fixed payload size given by this settin (does not include # other message structure overhead. # CONFIG_MAX_WDOGPARMS - Maximum number of parameters that # can be passed to a watchdog handler # CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog # structures. The system manages a pool of preallocated # watchdog structures to minimize dynamic allocations # CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX # timer structures. The system manages a pool of preallocated # timer structures to minimize dynamic allocations. Set to # zero for all dynamic allocations. # CONFIG_MAX_TASKS=16 CONFIG_MAX_TASK_ARGS=4 CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=1024 CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=0 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=4 CONFIG_PREALLOC_WDOGS=8 CONFIG_PREALLOC_TIMERS=8 # SPI driver # CONFIG_SPI_OWNBUS - Set if there is only one active device # on the SPI bus. No locking or SPI configuration will be performed. # It is not necessary for clients to lock, re-configure, etc.. # CONFIG_SPI_EXCHANGE - Driver supports a single exchange method # (vs a recvblock() and sndblock ()methods) # CONFIG_SPI_OWNBUS=y CONFIG_SPI_EXCHANGE=y # # TCP/IP and UDP support via uIP # CONFIG_NET - Enable or disable all network features # CONFIG_NET_IPv6 - Build in support for IPv6 # CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. # CONFIG_NET_SOCKOPTS - Enable or disable support for socket options # CONFIG_NET_BUFSIZE - uIP buffer size # CONFIG_NET_TCP - TCP support on or off # CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) # CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers # CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) # CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until # accept() is called. The size of the backlog is selected when listen() is called. # CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) # CONFIG_NET_UDP - UDP support on or off # CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off # CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections # CONFIG_NET_ICMP - ICMP ping response support on or off # CONFIG_NET_ICMP_PING - ICMP ping request support on or off # CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address # CONFIG_NET_STATISTICS - uIP statistics on or off # CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window # CONFIG_NET_ARPTAB_SIZE - The size of the ARP table # CONFIG_NET_BROADCAST - Broadcast support # CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates # CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=8 CONFIG_NET_SOCKOPTS=y CONFIG_NET_BUFSIZE=420 CONFIG_NET_TCP=y CONFIG_NET_TCP_CONNS=8 CONFIG_NET_NTCP_READAHEAD_BUFFERS=32 CONFIG_NET_TCPBACKLOG=n CONFIG_NET_MAX_LISTENPORTS=8 CONFIG_NET_UDP=y CONFIG_NET_UDP_CHECKSUMS=y #CONFIG_NET_UDP_CONNS=4 CONFIG_NET_ICMP=y CONFIG_NET_ICMP_PING=n #CONFIG_NET_PINGADDRCONF=0 CONFIG_NET_STATISTICS=y #CONFIG_NET_RECEIVE_WINDOW= #CONFIG_NET_ARPTAB_SIZE=8 CONFIG_NET_BROADCAST=n #CONFIG_NET_FWCACHE_SIZE=2 # # UIP Network Utilities # CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP # CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # # Settings for examples/uip CONFIG_EXAMPLE_UIP_NOMAC=y CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_UIP_DHCPC=n # # Settings for examples/nettest CONFIG_EXAMPLE_NETTEST_SERVER=n CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n CONFIG_EXAMPLE_NETTEST_NOMAC=y CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) # # Settings for examples/nsh CONFIG_NSH_CONSOLE=y CONFIG_NSH_TELNET=n CONFIG_NSH_IOBUFFER_SIZE=512 CONFIG_NSH_CMD_SIZE=40 CONFIG_NSH_STACKSIZE=4096 CONFIG_NSH_DHCPC=n CONFIG_NSH_NOMAC=y CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_NSH_BUILTIN_APPS=y # # LCD Drivers settings CONFIG_NX_LCDDRIVER=y CONFIG_LCD_SSD1783=y # # Graphics CONFIG_NX=y CONFIG_NXCONSOLE=n CONFIG_NX_KBD=y CONFIG_LCD_MAXPOWER=1 CONFIG_NX_BLOCKING=y CONFIG_NX_DISABLE_1BPP=y CONFIG_NX_DISABLE_2BPP=y CONFIG_NX_DISABLE_4BPP=y CONFIG_NX_DISABLE_8BPP=n CONFIG_NX_DISABLE_16BPP=y CONFIG_NX_DISABLE_32BPP=y CONFIG_NXCONSOLE_BPP=8 CONFIG_NXCONSOLE_NOGETRUN=y CONFIG_NXFONT_SANS17X22=y CONFIG_NX_MULTIUSER=n CONFIG_EXAMPLES_NXTEXT_BPP=8 CONFIG_EXAMPLES_NXTEXT_DEVNO=0 # # Settings for examples/hello CONFIG_EXAMPLES_HELLO_BUILTIN=y CONFIG_EXAMPLES_NXHELLO_BUILTIN=y CONFIG_EXAMPLES_NXTEXT_BUILTIN=y CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y CONFIG_EXAMPLES_NXLINES_BUILTIN=y CONFIG_EXAMPLES_NXLINES_EXTERNINIT=y CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=y CONFIG_EXAMPLES_NXTEXT_EXTERNINIT=y CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=y # # Settings for examples/wget # CONFIG_EXAMPLE_WGET_URL - The URL of the file to get # CONFIG_EXAMPLE_WGET_NOMAC - (May be defined to use software assigned MAC) # CONFIG_EXAMPLE_WGET_IPADDR - Target IP address # CONFIG_EXAMPLE_WGET_DRIPADDR - Default router IP addess # CONFIG_EXAMPLE_WGET_NETMASK - Network mask CONFIG_EXAMPLE_WGET_URL="http://www.nuttx.org/index.html" CONFIG_EXAMPLE_WGET_NOMAC=y CONFIG_EXAMPLE_WGET_IPADDR=(10L<<24|0L<<16|0L<<8|2L) CONFIG_EXAMPLE_WGET_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) CONFIG_EXAMPLE_WGET_NETMASK=(255L<<24|255L<<16|255L<<8|0L) # # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP # operation from FLASH but must copy initialized .data sections to RAM. # CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH # but copy themselves entirely into RAM for better performance. # CONFIG_CUSTOM_STACK - The up_ implementation will handle # all stack operations outside of the nuttx model. # CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) # CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. # This is the thread that (1) performs the inital boot of the system up # to the point where user_start() is spawned, and (2) there after is the # IDLE thread that executes only when there is no other thread ready to # run. # CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate # for the main user thread that begins at the user_start() entry point. # CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size # CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size # CONFIG_HEAP_BASE - The beginning of the heap # CONFIG_HEAP_SIZE - The size of the heap # CONFIG_BOOT_RUNFROMFLASH=n CONFIG_BOOT_COPYTORAM=n CONFIG_CUSTOM_STACK=n #CONFIG_STACK_POINTER CONFIG_IDLETHREAD_STACKSIZE=4096 CONFIG_USERMAIN_STACKSIZE=4096 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=4096 CONFIG_HEAP_BASE= CONFIG_HEAP_SIZE= # Application configuration CONFIG_APPS_DIR="../apps" --nextPart2762333.I70qBvf3Po--