This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Dario Lombardo dario.lombardo at libero.itDue to a minor issue in my cable the second solution didn't work. I can confirm that both solutions work well. On Wed, Feb 1, 2012 at 10:00 AM, Dario Lombardo <dario.lombardo at libero.it>wrote: > sudo ./osmocon -p /dev/ttyUSB0 -m c123xor > ../../target/firmware/board/compal_e88/loader.compalram.bin > sudo ./osmoload memload 0x820000 > ../../target/firmware/board/compal_e88/monitor.highram.bin > sudo ./osmoload jump 0x820000 > > This solution works pretty well! > > ./osmocon -p /dev/ttyUSB0 -m c123xor > -c ../../target/firmware/board/compal_e88/monitor.highram.bin ../../target/firmware/board/compal_e88/chainload.compalram.bin > > I'm not able to make this one working. The fw is downloaded but not run. > > monitor.highram.bin has been changed into rssi.highram.bin. > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20120201/9a8114ed/attachment.htm>