Beginner question of firmware and C139

david at frinet.es david at frinet.es
Thu Dec 27 16:38:12 UTC 2012


Hi all,
I am starting with this project and i have problems downloading the  
firmware to a c139, i built the t191 and i'm using a FTDI usb-serial.
I use the command that is described in "Motorola C140" section:
./osmocon -p /dev/ttyUSB0 -m c140 -c  
../../target/firmware/board/compal_e86/layer1.highram.bin  
../../target/firmware/board/compal_e86/chainload.compalram.bin
and also i have used it with "-m c140xor" but when i push briefly  
power button, shows it in next lines "got 1 byte from modem, data  
looks like: ff .", the data are changing in next lines, some times the  
bytes received are more than 1, are 2, 5, 6.
I have some questions:
Which is the sequence that have to receive the osmocon to start the  
comunication with the phone?
Is posible that the compilation of osmocon has been badly?

Thanks and regards.





More information about the baseband-devel mailing list