This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
J T Dsouza jtd1959 at gmail.comhttp://cp210x-program.sourceforge.net/ works nicely for me, except I have never used it to change the baudrate table. On Sat, Dec 29, 2012 at 12:33 AM, Bhaskar11 <niceguy108 at gmail.com> wrote: > Sysmocom sells pre-modified CP201x. You can use them as they are. > > "mostly" LAPDm and Paging messages is normal. You should also see call > setups and SMSs as they are used, much less frequently depending on local > traffic. :-) > > If you have your cellphone on the same ARFCN, you should be able to see > your cell making/receiving calls and sending messages. > > B. > > > On Fri, Dec 28, 2012 at 4:12 PM, Erich Dachleger <edachleger at yahoo.com>wrote: > >> I am also using CP210x from sysmocom and haven't modified it since I >> thought it didn't require modification. >> Is that wrong? >> When I use burst_ind with unmodified CP210x I receive mostly LAPDM and >> System 4 messages in wireshark. >> Regards >> Erich >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20121229/04551385/attachment.htm>