This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Tobias Funke torfun at web.deHi, sorry if I shouldn`t write correclly, i'm not that good in english. i have a Motorola c118 and now aFTDI cable. my problem: compiling was successfully. than i run osmocon: ./osmocon -p /dev/ttyUSB0 -m c123xor /home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin i pressed power button and get this output: got 2 bytes from modem, data looks like: 04 81 .. got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/loader.compalram.bin): file_size=17184, hdr_len=4, dnload_len=17191 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/17191) handle_write(): 4096 bytes (8192/17191) handle_write(): 4096 bytes (12288/17191) handle_write(): 4096 bytes (16384/17191) handle_write(): 807 bytes (17191/17191) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! Received DOWNLOAD ACK from phone, your code is running now! OSMOCOM Loader (revision osmocon_v0.0.0-1108-g7bbd2ac) ====================================================================== Running on compal_e88 in environment compalram Failed to initialize flash! _____________________ Why initializing flash failed? what is my fault? can you help me? thanks a lot, tobsen