This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
lonelysurfer lonelysurfer at web.de...a never ending story: i have a working ftdi-ttl, but the cp2102-adapters (http://www.ebay.de/itm/USB-2-0-to-TTL-UART-6PIN-CP2102-Module-Serial-Converter-/260887131702?pt=LH_DefaultDomain_0&hash=item3cbe15b636) with the same cable dont work under ubuntu or windows. if i rub the top of the 2.55mm with my finger random data appears. but the loader doesnt upload the firmware. i used the txd, rxd and gnd pins and checked the connections with a multimeter. i tested -m c123xor, -m c123 and the default firmware. flashing custom baudrates was no problem. drivers are installed correctly (stady ttyusb0 under ubuntu/ com1 under win). is there any hint? -- View this message in context: http://baseband-devel.722152.n3.nabble.com/cp2102-betemcu-B75937-tp3489323p3489323.html Sent from the baseband-devel mailing list archive at Nabble.com.