This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Gianni Tedesco gianni at scaramanga.co.ukOn Mon, 2011-05-23 at 13:43 +0200, Uli Kleemann wrote: > Hi fellows, > > I am new at osmocon and I would like to ask fpr some help about > flashing the firmware on my C118. > > I build the software as described on Ubuntu11.0.4 using gnuarm-3.4.3. > I use the Motorola T191 serial-cable on an Prolific Technology, Inc. > PL2303 Serial Port USB-Serial adapter. (module USB-serial is loaded) > > when I startosmocon like this: > ./osmocon -p /dev/ttyUSB0 -m c123xor > ../../target/firmware/board/compal_e88/loader.compalram.bin > > all I get is that: > > got 2 bytes from modem, data looks like: fe 00 .. > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 00 . Just looks like noise from plugging the cable in to the phone. > Can anybody give me an advice how to fix that? Did you press the power button on the phone? Just a quick tap is required, not a long press like you would normally do to turn it on. Gianni