This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Henk henk.vergonet at gmail.comHi all, I am trying to get a dump of the DSP code, but after 2 lines of hex the device seems to get stuck. Some watchdog or so, missing something in the initialization sequence? According to the docs the cDSP ID seems to indicate a version B dsp... Any ideas what I can do to investigate? - Henk ./osmocon -p /dev/ttyS0 -m c123 ../../target/firmware/board/compal_e88/compal_dsp_dump.compalram.bin Output: (I had commented the register locations to see if it helped...) OSMOCOM Compal DSP Dumper (revision osmocon_v0.0.0-780-gb7a4d8d-modified) ====================================================================== Device ID code: 0xb4fb ==> CalypsoLite Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 ==> Version B Die ID code: 168f2c10cb001251 ====================================================================== Assert DSP into Reset Releasing DSP from Reset DSP bootloader version 0x0100 DSP dump: DROM [09000-0dfff] 09000 : 0006 0052 ff7d 009a ffc8 fd21 00b7 ffbf fef7 0009 ff2e fe97 0071 02ce 0719 03f2 09010 : 04be 0625 0359 0535 08e4 033b 0620 078d 02cd 07c5 089e 0346 0494 071f 02d1 03e8