This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Muhammad Rasyid Sahputra ninja at infosec-id.comHi, you need to perform: telnet localhost 4247 then you'll get a console interface to interact with mobile application On Mon, Jun 20, 2011 at 12:47 PM, adel <b8.adel at gmail.com> wrote: > hello > i have Motorola c123 The following are my steps: > 1- > $ cd osmocom-bb > $ git checkout -b testing remotes/origin/sylvain/testing > fatal: git checkout: branch testing already exists > 2- > ~/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m c123xor > ../../target/firmware/board/compal_e88/layer1.compalram.bin > got 2 bytes from modem, data looks like: 2f 00 /. > got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A > got 1 bytes from modem, data looks like: 01 . > got 1 bytes from modem, data looks like: 40 @ > Received PROMPT1 from phone, responding with CMD > read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin): > file_size=51320, hdr_len=4, dnload_len=51327 > got 1 bytes from modem, data looks like: 1b . > got 1 bytes from modem, data looks like: f6 . > got 1 bytes from modem, data looks like: 02 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 41 A > got 1 bytes from modem, data looks like: 02 . > got 1 bytes from modem, data looks like: 43 C > Received PROMPT2 from phone, starting download > handle_write(): 4096 bytes (4096/51327) > handle_write(): 4096 bytes (8192/51327) > handle_write(): 4096 bytes (12288/51327) > handle_write(): 4096 bytes (16384/51327) > handle_write(): 4096 bytes (20480/51327) > handle_write(): 4096 bytes (24576/51327) > handle_write(): 4096 bytes (28672/51327) > handle_write(): 4096 bytes (32768/51327) > handle_write(): 4096 bytes (36864/51327) > handle_write(): 4096 bytes (40960/51327) > handle_write(): 4096 bytes (45056/51327) > handle_write(): 4096 bytes (49152/51327) > handle_write(): 2175 bytes (51327/51327) > handle_write(): finished > got 1 bytes from modem, data looks like: 1b . > got 1 bytes from modem, data looks like: f6 . > got 1 bytes from modem, data looks like: 02 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 41 A > got 1 bytes from modem, data looks like: 03 . > got 1 bytes from modem, data looks like: 42 B > Received DOWNLOAD ACK from phone, your code is running now! > > > OSMOCOM Layer 1 (revision osmocon_v0.0.0-786-g937023b) > ====================================================================== > Device ID code: 0xb4fb > Device Version code: 0x0000 > ARM ID code: 0xfff3 > cDSP ID code: 0x0128 > Die ID code: df0d1621a400d808 > ====================================================================== > REG_DPLL=0x2413 > CNTL_ARM_CLK=0xf0a1 > CNTL_CLK=0xff91 > CNTL_RST=0xfff3 > CNTL_ARM_DIV=0xfff9 > ====================================================================== > > > THIS FIRMWARE WAS COMPILED WITHOUT TX SUPPORT!!! > Assert DSP into Reset > Releasing DSP from Reset > Setting some dsp_api.ndb values > Setting API NDB parameters > DSP Download Status: 0x0001 > DSP API Version: 0x0000 0x0000 > Finishing download phase > DSP Download Status: 0x0002 > DSP API Version: 0x3606 0x0000 > LOST 1968! > > 3- > ~/osmocom-bb/src/host/layer23/src/mobile$ ./mobile > Copyright (C) 2008-2010 ... > Contributions by ... > > License GPLv2+: GNU GPL version 2 or later > <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > > <000e> sim.c:1206 init SIM client > <0005> gsm48_cc.c:61 init Call Control > <0001> gsm48_rr.c:4944 init Radio Ressource process > <0004> gsm48_mm.c:1220 init Mobility Management process > <0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM. > <0002> gsm322.c:3472 init PLMN process > <0003> gsm322.c:3473 init Cell Selection process > Mobile '1' initialized, please start phone now! > VTY available on port 4247. > <0004> subscriber.c:556 Requesting SIM file 0x2fe2 > <000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) > <000e> sim.c:697 go MF > <000e> sim.c:241 SELECT (file=0x3f00) > <000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4) > > I wait and wait and nothing happens to keep as is? > What is the solution to this problem? > I hope someone can help me as soon as > > > > -- > View this message in context: > http://baseband-devel.722152.n3.nabble.com/help-me-i-have-motorola-c123-tp3085529p3085529.html > Sent from the baseband-devel mailing list archive at Nabble.com. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20110626/14f2255c/attachment.htm>