This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Martin Hauke mardnh at gmx.de> I still can't make the gps working. In gps.c the line from serial port > is parsed to find $GPGLL. My device doesn't give this line. These are > the lines that it gives me > > $GPGGA > $GPGSA > $GPGSV > $GPRMC > > $GPGGA should give the position as $GPGLL should, but the software > doesn't use it. Is it correct to say that the positioning data could > be taken from different NMEA data? If yes, is it reasonable to add the > support for other messages? > > i've had the same issue. Use the attached patch to read the required data from the $GPGGA NMEA sentence. - Martin -------------- next part -------------- A non-text attachment was scrubbed... Name: locosys-gpgga.patch Type: text/x-patch Size: 3190 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20110128/5c7aac44/attachment.bin>