This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Andreas.Eversberg Andreas.Eversberg at versatel.dehi, can you try the following steps: 1. start osmocon 2. start mobile (be sure it is not shutdown) 3. press the power button on the phone to start the loading process after loading the binary into the phone, the phone should indicate power on to the mobile process. andreas ________________________________ Von: Sebastian --- [mailto:seppel18 at hotmail.com] Gesendet: Freitag, 7. Januar 2011 01:37 An: Andreas.Eversberg Betreff: Osmocom-BB Hi Thanks for your Help. Now it says ms 1 is still down "radio not started". Osmocon is running (with ramloader) and layer2 socket is available. hi sebastian, there are three ways to bing it down: - "enable" -> "conf t" -> "ms 1" -> "shutdown" - the layer2 socket does not exist on startup (osmocon loader not started) - the shutdown state is stored in the config (doing "write" when it is down) just bring it up after starting osmocon: - "enable" -> "conf t" -> "ms 1" -> "no shutdown" and don't forget "write" the config, so it must not be done on every startup. andreas -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20110107/a56ccd5d/attachment.htm>