This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Ethan Brown evandersh at gmail.comInside the socket client, I don't have access to the osmocom_ms instance, so I cannot make/answer calls. How did you do that in your LCR integration? On Fri, Dec 9, 2011 at 9:01 AM, Ethan Brown <evandersh at gmail.com> wrote: > As you said, I was doing something wrong. Sorry, my mistake. It works > perfectly now. > > By the way, I wanted to include AMR support. What should I do to make > this possible? > > > > On Thu, Dec 8, 2011 at 3:27 PM, Sylvain Munaut <246tnt at gmail.com> wrote: > >> > I decided to test another route, writing on socket /tmp/ms_mncc_1 data >> with >> > the gsm_data_frame structure. I see that this socket expects GSM FR >> data, >> > and setting the audiomode to AUDIO_TX_TRAFFIC_REQ | >> AUDIO_RX_TRAFFIC_IND. >> > It seems that the peer receives this data, but I cannot hear the audio >> > correctly. Am I missing something? Was this feature tested before? >> >> Yes, it's used in the LCR integration and works fine, so you must be >> doing something wrong. >> >> Note that you must make sure to disable EFR support in the config or >> the network might assign you a EFR channel and you send FR data which >> is not going to work out ... >> >> Cheers, >> >> Sylvain >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20111213/f0152a5a/attachment.htm>