Hello everyone,

I am having issue with listening for the logs from the debug UART for SIMtrace2. I run "make log" and I get: Sep 28 13:56:17 (@(@����(B(B(B�@B(B(B@(@(@��(BB(B(B(@(((B((@B(B�@(B���@(@�B(B(B(((B�(B(B(��@�� Sep 28 13:56:17 (B(�@@(@B(B�(��@(@�(B�@(B(�@B(BB(B(@(@B(B((@B(B((@@(�@B(B(B(�@�@�B(B��@B(B(B@(@ Sep 28 13:56:17 ((B(@(@@(@(���((B(B(B(�((B(�@B(�(B(B(BB(B(�@(B((B((B(B(B(B((BB(BR��(B(@(@@(B(�BB(@(@@( Sep 28 13:56:17 B(B(@�@(�(@(@@(@��(B(�(B(B(��(B(B(B@(����(B�@(B(B(B�@(@(@(@�(�(@@((B(�B(B@(@

I tried different setting combinations in stty, I tried minicom and picocom, and all resulted in either nothing being printed or more garbage, never actual ASCII logs. Here is the stty configuration: speed 921600 baud; rows 0; columns 0; line = 0; intr = ^C; quit = ^; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0; -parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke -flusho -extproc

I also tried official bin for trace and build from source for trace and cardem, with same results.

System info: Debian GNU/Linux 13.7 (trixie) Linux 6.12.107+deb13-amd64 SIMtrace2 v1.4pi sysmocom USB serial cable CP2102-25

Thank you, William