This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)".
The branch, pmaier/aoip2 has been updated
via e773bff7cea7ca8ac80055095396e5275ba2ee1e (commit)
via d93ee55ecfbf834ed71bdf830d5f1de5982d893a (commit)
via bce69325220f2af7cc0746611de30225263514d9 (commit)
via 067fbaf92216e8ad8037e6d2e372476cbafb6cec (commit)
from 4f451dc0a9865b676a1920bd1a632c213952e7ad (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/openbsc/commit/?id=e773bff7cea7ca8ac80055095396e527…
commit e773bff7cea7ca8ac80055095396e5275ba2ee1e
Author: Philipp Maier <pmaier(a)sysmocom.de>
Date: Fri Jul 21 18:49:12 2017 +0200
gsm04_08.c patches from neels (remove when committed properly)
0001-imsi-detach-improve-error-logging.patch
0002-imsi-detach-always-close-connection-explicitly.patch
http://cgit.osmocom.org/openbsc/commit/?id=d93ee55ecfbf834ed71bdf830d5f1de5…
commit d93ee55ecfbf834ed71bdf830d5f1de5982d893a
Author: Philipp Maier <pmaier(a)sysmocom.de>
Date: Fri Jul 21 18:47:19 2017 +0200
a-iface: move clear command to subscriber_conn.c
The clear command is currently triggered from the wrong place.
This is a fixup that corrects that. However, it will introduce
another problem: The clear command is not sent on detatach.
http://cgit.osmocom.org/openbsc/commit/?id=bce69325220f2af7cc0746611de30225…
commit bce69325220f2af7cc0746611de30225263514d9
Author: Philipp Maier <pmaier(a)sysmocom.de>
Date: Fri Jul 21 18:38:36 2017 +0200
vty: Fixup sccp/ss7 configuration
The sccp/ss7 configuration is now fixed. The cs7 instance id is
implicitly detected from the bsc_addr or the msc_addr. Depending
on what is listed last. (I am not sure if that is wise, maybe
we should only use the local/bsc address to do the lookup).
Remove cs7-instance vty command
Modify VTY commands, so that the fixed API is used
Set msc->a.cs7_instance from the VTY to when msc/bsc addr is parsed
Fix the initalization to use osmo_sccp_simple_client_on_ss7_id() and
pass the cs7-instance id we determined from the vty.
The whole thing is not waterproof yet. We are still not at the
point where we allow to leave the local address out. This would
be fine, but when it is left out, the only way to determine the
cs7 instance is to use the msc_addr then.
We also might want to make sure to reach a state where all cs7
related config may be left out (like with the MSC)
http://cgit.osmocom.org/openbsc/commit/?id=067fbaf92216e8ad8037e6d2e372476c…
commit 067fbaf92216e8ad8037e6d2e372476cbafb6cec
Author: Philipp Maier <pmaier(a)sysmocom.de>
Date: Fri Jul 21 17:27:31 2017 +0200
fixup for: mgcp: display properly mgcp-messages in log
-----------------------------------------------------------------------
Summary of changes:
openbsc/include/openbsc/bsc_msc_data.h | 2 +-
openbsc/src/libmgcp/mgcp_protocol.c | 3 ++
openbsc/src/libmsc/gsm_04_08.c | 28 ++++++-------
openbsc/src/libmsc/osmo_msc.c | 4 --
openbsc/src/libmsc/subscr_conn.c | 7 ++++
openbsc/src/osmo-bsc/osmo_bsc_sigtran.c | 20 ++++++---
openbsc/src/osmo-bsc/osmo_bsc_vty.c | 73 ++++++++-------------------------
7 files changed, 56 insertions(+), 81 deletions(-)
hooks/post-receive
--
Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)