This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)".
The branch, fairwaves/master has been created
at e878d07c1c219441676a046d2d267c48d1d618e2 (commit)
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/openbsc/commit/?id=e878d07c1c219441676a046d2d267c48…
commit e878d07c1c219441676a046d2d267c48d1d618e2
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Tue Jul 21 11:40:08 2015 +0300
sub: Add the ability to set prefix for randomly generated extensions
Prefix is added before randomly generated extension.
Prefix is useful in case of "accept-all" authentication mode is used
and routing based on number prefix is used.
Added optional configuration parameter "extension-prefix".
http://cgit.osmocom.org/openbsc/commit/?id=b26b74924dc155f0b36d9940d325ffb1…
commit b26b74924dc155f0b36d9940d325ffb1900d8f46
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Tue Jun 30 15:33:03 2015 +0300
debian: osmocom-meas-utils should not depend on -dev packages
http://cgit.osmocom.org/openbsc/commit/?id=0b19f7af80284991cc8512ae4d168469…
commit 0b19f7af80284991cc8512ae4d168469a100eeee
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Sat May 30 14:42:50 2015 -0400
libbsc: Update a BTS's SIs when ms_max_power is changed from VTY.
Otherwise you have to restart BTS or at least break the RSL connection
to apply the change.
http://cgit.osmocom.org/openbsc/commit/?id=3ec78f0d49513b78a0fca5a6861f34f6…
commit 3ec78f0d49513b78a0fca5a6861f34f638c4b5bf
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Sat May 30 14:40:54 2015 -0400
libbsc: Abstract out SIs update/generation for a BTS into a separate function.
The code to do that doesn't belong to the control interface, so abstract it out
to a separate function gsm_bts_set_system_infos().
http://cgit.osmocom.org/openbsc/commit/?id=a9c6d44035d91dab550912c244ecd317…
commit a9c6d44035d91dab550912c244ecd317cb129347
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Fri May 29 13:07:08 2015 -0400
debian: Add osmocom-meas-utils package
http://cgit.osmocom.org/openbsc/commit/?id=90459a0507b7b0fc66a7c764c48c8f24…
commit 90459a0507b7b0fc66a7c764c48c8f244ce66989
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Sun May 17 20:52:26 2015 -0400
libmsc: Update 'max_power_red' VTY command.
Changes:
* Apply change even if the supplied value is odd, just warn that it is rounded.
* Apply change even if the supplied value is higher than the 24dB maximum
suggested by the standard, just warn about this.
* Apply change to the BTS over OML immediately.
http://cgit.osmocom.org/openbsc/commit/?id=ade03887bbfee19b970dcaed1220cc3a…
commit ade03887bbfee19b970dcaed1220cc3a19867eaf
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Wed May 27 16:15:37 2015 +0300
debian: build only osmo-nitb package
- enable smpp support
- disable the gbproxy test (failing)
http://cgit.osmocom.org/openbsc/commit/?id=d38e96df2a94c74304540b9cd6ec6a2d…
commit d38e96df2a94c74304540b9cd6ec6a2d5f95f77e
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Tue May 26 13:36:58 2015 +0300
gsm_04_08: Use osmo_assert for transt->conn and conn only in case of paging
succeeded
setup_trig_pag_evt function can receive parameter conn = NULL, if T3113 expires.
http://cgit.osmocom.org/openbsc/commit/?id=8d0f77c8ffe328cd80b6f01e721220cd…
commit 8d0f77c8ffe328cd80b6f01e721220cd6867a98d
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Mar 31 12:01:25 2013 +0200
osmo-nitb support for codec negotiation
The caller's most preferred codec is selected out of the union of codecs,
which both parties support.
Since codec negotiation is done automatically, there is no need to define
codec for TCH/F and TCH/H via VTY anymore.
Conflicts:
openbsc/src/libmsc/gsm_04_08.c
openbsc/src/libmsc/vty_interface_layer3.c
http://cgit.osmocom.org/openbsc/commit/?id=4e3a2670550ef0cabd8e682395ea3859…
commit 4e3a2670550ef0cabd8e682395ea385967824049
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Mar 31 11:57:38 2013 +0200
If requested TCH/H channel is not available, try assigning TCH/F
If MNCC application requests a half rate channel, the channel might not be
available, due to different cell configuration, so the full rate channel
is used instead.
http://cgit.osmocom.org/openbsc/commit/?id=3b1cd6dd8152dff1e3e4e2045d359b7d…
commit 3b1cd6dd8152dff1e3e4e2045d359b7d1bb0495e
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Mar 31 11:44:34 2013 +0200
Fix: If paging for half rate was requested, use hr, if supported by MS
http://cgit.osmocom.org/openbsc/commit/?id=1a3dd31c3b3dcf927f0f600888d765e9…
commit 1a3dd31c3b3dcf927f0f600888d765e95c1a17c3
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Jan 19 11:47:44 2014 +0100
Add full AMR multirate IE support with VTY config for MS and BTS side
Conflicts:
openbsc/include/openbsc/gsm_data_shared.h
openbsc/src/libbsc/bsc_vty.c
openbsc/src/libbsc/chan_alloc.c
http://cgit.osmocom.org/openbsc/commit/?id=dfd8d0cde07a3d08e93bc8b6fa17d0f5…
commit dfd8d0cde07a3d08e93bc8b6fa17d0f561549b5b
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Thu Mar 14 09:41:18 2013 +0100
Drop bad speech frames rather than forwarding them via RTP
Some RTP endpoints may not check for bad frame indications, so a frame
that is marked as bad may be still forwarded, which creates anoying noise.
This patch drops these frames. It depends on the other RTP endpoint how
dropped frames are handled. (insert silence, extrapolate speech...)
http://cgit.osmocom.org/openbsc/commit/?id=f4d336e2c4208c10c107b23826df95c2…
commit f4d336e2c4208c10c107b23826df95c27d0661ac
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Mon Mar 11 08:20:48 2013 +0100
Add check for non existing lchan at tch_frame_down()
Traffic cannot sent to BTS, if there is (currently) no logical channel
associated with the transaction.
This happens, if TCH traffic is received from upper layer, but there is
no lchan available before completing immediate assignment, handover or
assignment process.
http://cgit.osmocom.org/openbsc/commit/?id=ce7437e27c3da61dc5bd112285295440…
commit ce7437e27c3da61dc5bd112285295440ada45ea6
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Mar 10 11:50:19 2013 +0100
Send RADIO LINK TIMEOUT value via OML attribute to BTS
The same radio link timeout value is used for BTS and MS side.
http://cgit.osmocom.org/openbsc/commit/?id=b402dad7f1451b88154f777b5aead4d5…
commit b402dad7f1451b88154f777b5aead4d5f5c7621e
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Mar 10 11:49:35 2013 +0100
Add option to set RADIO LINK TIMEOUT value via VTY
http://cgit.osmocom.org/openbsc/commit/?id=39494b875165848fa16d3e7b328677dd…
commit 39494b875165848fa16d3e7b328677dd8d26163b
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Fri Feb 17 15:20:59 2012 +0100
Allow dynamic RTP payload types between application and MNCC interface
Since EFR/AMR/HR codecs use dynamic RTP payload, the payload type can
be set. If it is set, the frame type must be set also, so OpenBSC
knows what frame types are received via RTP.
This modification only affects traffic beween application and MNCC
interface, not the RTP traffic between OpenBSC and BTS.
Conflicts:
openbsc/src/libtrau/rtp_proxy.c
http://cgit.osmocom.org/openbsc/commit/?id=bc1aaacf7412e7a042e28be75139a72d…
commit bc1aaacf7412e7a042e28be75139a72de3324c93
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Mon Jan 16 09:29:28 2012 +0100
Add traffic forwarding via RTP to remote application
Instead of forwarding traffic through MNCC interface, traffic can
be forwarded to a given RTP peer directly. A special MNCC message
is used to control the peer's destination. The traffic can still be
forwarded through MNCC interface when this special MNCC message is
not used.
It also works with E1 based BTSs.
In conjunction with LCR's "rtp-bridge" feature, the RTP traffic
can be directly exchanged with a remote SIP endpoint, so that the
traffic is not forwarded by LCR itself. This way the performance
of handling traffic only depends on OpenBSC and the remote SIP
endpoint. Also the traffic is exchanged with the SIP endpoint
without transcoding, to have maximum performance.
Increment MNCC version to 5.
Conflicts:
openbsc/tests/gbproxy/gbproxy_test.c
-----------------------------------------------------------------------
hooks/post-receive
--
The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)