This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, master has been updated via 2f3e60bc1f7da051183fe00f961d14da6d2c5981 (commit) from cbfef6e40a030a7e99c8bba49482ac53f05b803b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=2f3e60bc1f7da051183fe00f961d14d… commit 2f3e60bc1f7da051183fe00f961d14da6d2c5981 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Sun Jul 17 19:29:08 2016 -0700 uhd: Add command line option for GPS reference Unlike earlier versions of UHD, the current release (3.9.2) does not automatically select on-board GPSDO as the reference source. Modify the command line settings to allow explicit selection of GPS in addition to the external setting. Simultaneous GPS and external reference settingis disallowed. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> ----------------------------------------------------------------------- Summary of changes: Transceiver52M/UHDDevice.cpp | 24 ++++++++++++++++++++---- Transceiver52M/USRPDevice.cpp | 2 +- Transceiver52M/USRPDevice.h | 2 +- Transceiver52M/osmo-trx.cpp | 37 +++++++++++++++++++++++++++++++------ Transceiver52M/radioDevice.h | 8 +++++++- 5 files changed, 60 insertions(+), 13 deletions(-) hooks/post-receive -- OpenBTS' transceiver retro-fit