This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, laforge/power_control has been created at f0bf5de82d48bca4e574469aa85a0e0ed146caae (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=f0bf5de82d48bca4e574469aa85a0e0… commit f0bf5de82d48bca4e574469aa85a0e0ed146caae Author: Harald Welte <laforge(a)gnumonks.org> Date: Sun Dec 13 17:08:13 2015 +0100 RSL: Be more spec compliant in terms of ms / bs power control TS 08.58 requires that BTS-autonomous MS power control is _not_ used, if only the MS Power IE is present in a channel activation. Rather, in order to enable the BTS-autonomous power control loop, the MS Power Parameters must be included. So far we were always enabling MS power control, even in the absence of the MS Power parmeters IE. This is fixed now. This meanas you will need a correspondingly new OsmoBSC/OsmoNITB that sends this IE, or you loose MS (uplink) power control altogether. The content of the MS Power Parameters IE is parsed, but the threshold values not used yet at this point. ----------------------------------------------------------------------- hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)