This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom BTS-side code (Abis, scheduling, ...)".
The branch, master has been updated
via 1eaa3d72eaa10bb854b2adff48d3f7f3e06dcb8c (commit)
via 668f8df3be7f644056d16ea4a7fd7929429da0b4 (commit)
via cc4a08bdc753492c4367e4786a573a6cdf84b56e (commit)
from 862807504b5ecf4fe79c435286487a1a576d09eb (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-bts/commit/?id=1eaa3d72eaa10bb854b2adff48d3f7f…
commit 1eaa3d72eaa10bb854b2adff48d3f7f3e06dcb8c
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Mon Sep 21 11:28:03 2015 +0200
audio/rsl: Honor the speech mode and don't send anything
Spotted by Ciaby while debugging an audio issue. Do not
send anything to port==0 to the BSC/NITB. Look at the
upper bits of the speech_mode to determine if sending is
allowed. 0x1 means recv_only and all other modes allow us
to send.
Manually verified with a single phone call with LCR bridge
mode to send a CRCX early but a MDCX sendrecv later. The
audio starts to flow after the MDCX message. Virtual Addr
space didn't increase over 10 calls. The l1p_msg is freed
by the caller.
The code might not re-set speech_mode from one call to
another but if it is ever != 0 it can be expected that
the BSC will always set it. This is because we do not
(and don't want to) allocate the lchan dynamically on
every usage.
Fixes: SYS#2111
http://cgit.osmocom.org/osmo-bts/commit/?id=668f8df3be7f644056d16ea4a7fd792…
commit 668f8df3be7f644056d16ea4a7fd7929429da0b4
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Mon Sep 21 11:18:06 2015 +0200
audio/rsl: Include statistics for one call
Use the new libosmo-abis API to query the session for the
statistics and then send it as a TLV element to the BSC.
This can be used to do post processing about the call. E.g
to figure out if no audio arrived at all.
http://cgit.osmocom.org/osmo-bts/commit/?id=cc4a08bdc753492c4367e4786a573a6…
commit cc4a08bdc753492c4367e4786a573a6cdf84b56e
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Mon Sep 21 09:52:36 2015 +0200
audio/rsl: Include the connection identifier in the DLCX ind
I have traces that include the connection identifier in the
DLCX indication.
-----------------------------------------------------------------------
Summary of changes:
src/common/rsl.c | 41 ++++++++++++++++++++++++++++++++++++++---
src/osmo-bts-sysmo/tch.c | 8 ++++++++
2 files changed, 46 insertions(+), 3 deletions(-)
hooks/post-receive
--
Osmocom BTS-side code (Abis, scheduling, ...)