This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "OpenBTS' transceiver retro-fit".
The branch, fairwaves/master-old has been created
at 2fb62ea45e8287821175558e1d75209b46355348 (commit)
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-trx/commit/?id=2fb62ea45e8287821175558e1d75209…
commit 2fb62ea45e8287821175558e1d75209b46355348
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Mon Apr 8 00:14:08 2013 +0200
Transceier52M: Make error response to an unknown command on UDP command interface more
understandable.
Previously we just repeated the last response which could confuse a command sender.
http://cgit.osmocom.org/osmo-trx/commit/?id=feb4028b1b16c69ac363e3db550d54a…
commit feb4028b1b16c69ac363e3db550d54a7792242db
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Tue May 19 23:58:02 2015 -0400
Transceiver: Check TSC values to be in [0..7] range.
http://cgit.osmocom.org/osmo-trx/commit/?id=7451e47d8afc4973a4fca9300198459…
commit 7451e47d8afc4973a4fca9300198459cec568e19
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Sun May 17 23:25:57 2015 -0400
uhd: Output Rx/Tx gain limits to log to make it more transparent.
http://cgit.osmocom.org/osmo-trx/commit/?id=a6e2d6f9a109662ff4e95bff1d49dfa…
commit a6e2d6f9a109662ff4e95bff1d49dfa00c4b164c
Author: Tom Tsou <tom(a)tsou.cc>
Date: Thu Dec 18 15:26:57 2014 -0800
Transceiver52M: Add clipping detection on RACH input
Alert user of overdriven RACH input indicated by a positive
threshold detector result. This indication serves as notification
that the receive RF gain level is too high for the configured
transceiver setup.
Signed-off-by: Tom Tsou <tom(a)tsou.cc>
http://cgit.osmocom.org/osmo-trx/commit/?id=456cf7f068e7244c4558c0e6eaa02dc…
commit 456cf7f068e7244c4558c0e6eaa02dcbdfdc210b
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Tue Apr 28 12:20:49 2015 -0400
A hack to pass all dev.args to UHD.
http://cgit.osmocom.org/osmo-trx/commit/?id=8974a801927100a7657fd973c5b0982…
commit 8974a801927100a7657fd973c5b098289ac6f35f
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Thu Apr 9 18:55:02 2015 +0300
umtrx: Don't use DSP tuning, because LMS6002D PLL steps are small enough.
We end up with DSP tuning just for 2-3Hz, which is meaningless and
only distort the signal.
http://cgit.osmocom.org/osmo-trx/commit/?id=63cd7705a9bf04e33f33fb26f25ef23…
commit 63cd7705a9bf04e33f33fb26f25ef23a23a1e9a6
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Tue Apr 28 13:26:07 2015 -0400
uhd: Update UmTRX specific code to work with PA Tx gain.
http://cgit.osmocom.org/osmo-trx/commit/?id=00cc772f90b274bb75232f29b20c31d…
commit 00cc772f90b274bb75232f29b20c31d5b552cfde
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Tue Apr 28 23:09:02 2015 -0400
uhd: Set RF frontend bandwidth for UmTRX to improve signal quality.
http://cgit.osmocom.org/osmo-trx/commit/?id=34333e8919d02fd1e4177917dd425a9…
commit 34333e8919d02fd1e4177917dd425a9ee6e615e1
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Wed Apr 29 17:30:18 2015 +0300
debian: make it possible to install osmo-trx dependencies manually on the system
http://cgit.osmocom.org/osmo-trx/commit/?id=947fc8cd1f6b468798d015e0032ffb5…
commit 947fc8cd1f6b468798d015e0032ffb541a849e50
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Tue Apr 28 13:17:31 2015 -0400
Revert "UmTRX: Fix Tx gain setting procedure for the best signal quality."
This reverts commit 48da6f97e3274f751a133365b526f4ca0f3b7ea1.
http://cgit.osmocom.org/osmo-trx/commit/?id=cd20d12392811ef92fe0f60c6184c31…
commit cd20d12392811ef92fe0f60c6184c31f483fc07e
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Wed Mar 25 14:22:37 2015 +0300
uhd: Use full DAC scale with UmTRX to improve signal quality.
http://cgit.osmocom.org/osmo-trx/commit/?id=b61d91b50d1efe4cc303c2e9838de9f…
commit b61d91b50d1efe4cc303c2e9838de9fb54148d26
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Sun Mar 1 10:30:12 2015 +0100
Logger: Output ERR log messages to stderr as well.
http://cgit.osmocom.org/osmo-trx/commit/?id=3531a6a6ac36e59c41a93cd9e07ae4c…
commit 3531a6a6ac36e59c41a93cd9e07ae4cc1529522f
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Mon Feb 23 17:46:10 2015 +0300
debian: update osmo-trx dependencies
Now we use uhd and umtrx-uhd instead of libuhd-dev.
http://cgit.osmocom.org/osmo-trx/commit/?id=19c392df82fe7acd303e4340059c87c…
commit 19c392df82fe7acd303e4340059c87c432623881
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Tue Dec 16 15:12:57 2014 +0300
Handover support for transceiver (TCH/F TCH/H SDCCH4 SDCCH8)
It allows to enable/disable access burst detection on each subslot individually.
http://cgit.osmocom.org/osmo-trx/commit/?id=48da6f97e3274f751a133365b526f4c…
commit 48da6f97e3274f751a133365b526f4ca0f3b7ea1
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Fri Sep 26 17:09:39 2014 +0400
UmTRX: Fix Tx gain setting procedure for the best signal quality.
We fixed setting Tx gain procedure in UHD, so we should fix it in osmo-trx too.
From our measurements, VGA1 must be 18dB plus-minus one and VGA2 is the best when 23dB
or lower.
http://cgit.osmocom.org/osmo-trx/commit/?id=ed10f05eddddd4ce5a2a273e2979a4f…
commit ed10f05eddddd4ce5a2a273e2979a4f85a5acacb
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Mon Sep 22 17:32:53 2014 +0400
debian: Add debug package for the osmo-trx
http://cgit.osmocom.org/osmo-trx/commit/?id=a5ae4b52ca35262e35ab78355027084…
commit a5ae4b52ca35262e35ab7835502708442e6d79e8
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Sun Mar 9 14:58:40 2014 +0400
debian: Add debian directory to ease building packages
http://cgit.osmocom.org/osmo-trx/commit/?id=50fc8a1e9e81eaa735d288cf0383afa…
commit 50fc8a1e9e81eaa735d288cf0383afa9f2b32c77
Author: Ivan Kluchnikov <kluchnikovi(a)gmail.com>
Date: Mon Jun 30 20:36:51 2014 +0400
Transceiver52M: UHD: Exit on receive more than 100 timeout errors
Receiving timeout is not a fatal error and should be recoverable on network devices.
But for some reasons these errors are not always recoverable, in this case osmo-trx
should be restarted.
http://cgit.osmocom.org/osmo-trx/commit/?id=79ca9ae69450142abf51c8cbd4d4a39…
commit 79ca9ae69450142abf51c8cbd4d4a39e33169c92
Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com>
Date: Sat Apr 19 17:25:00 2014 +0400
UmTRX: Manually set Tx gain stages for the best signal quality.
New UHD versions support split configuration of Tx gain stages.
We utilize this to set the gain configuration, optimal for
the Tx signal quality. From our measurements, VGA1 must be
18dB plus-minus one and VGA2 is the best when 23dB or lower.
-----------------------------------------------------------------------
hooks/post-receive
--
OpenBTS' transceiver retro-fit