This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "UNNAMED PROJECT".
The branch, master has been updated
via 0eabffdc35bef3bb678014d4c377ab8a2ac5951f (commit)
via 1842c921b3ed5c941a092542b922274c535111a9 (commit)
via adcdf150a63b3fe13dd933fca9f51974f40aeede (commit)
from a41a71e2d4fd02a941dff5cc504c064f60c7e234 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-pcu/commit/?id=0eabffdc35bef3bb678014d4c377ab8…
commit 0eabffdc35bef3bb678014d4c377ab8a2ac5951f
Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de>
Date: Mon Mar 2 14:28:12 2015 +0100
sched: Modify DL scheduling to use different priorities
Currently the DL blocks are scheduled round robin to each TBF that is
either in state FLOW or FINISHED and not waiting for an IMM.ASS
confirmation. This way, if single blocks has been NACK'ed by the MS
and the PCU has already resent the missing packets, the PCU starts
retransmitting them until it has received an ACK/NACK even if other
TBF have RLC blocks that need to be transmitted.
This commit changes sched_select_downlink to select the next TBF with
the highest priority, where blocks that are going to be resent again
have a lower priority unless the window is stalling. If there is only
one TBF the old behaviour is kept, since there is no other TBF that
can have a higher priority.
If there is much packet loss on a single phone, this modification can
lead to a higher latency for that MS.
Sponsored-by: On-Waves ehf
http://cgit.osmocom.org/osmo-pcu/commit/?id=1842c921b3ed5c941a092542b922274…
commit 1842c921b3ed5c941a092542b922274c535111a9
Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de>
Date: Mon Mar 2 13:01:35 2015 +0100
tbf: Reduce m_new_tbf logging messages
Currently tbf->m_new_tbf may point to itself if no new TBF is
assigned. But this leads to additional logging messages, since the
code in set_new_tbf and tbf_free assumes, that a real new TBF is
assigned and generates log messages accordingly.
This commit adds checks to avoid those messages in the above case.
Sponsored-by: On-Waves ehf
http://cgit.osmocom.org/osmo-pcu/commit/?id=adcdf150a63b3fe13dd933fca9f5197…
commit adcdf150a63b3fe13dd933fca9f51974f40aeede
Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de>
Date: Tue Mar 3 14:45:55 2015 +0100
tbf: Add name() method and put the buf into the tbf
Currently tbf_name() must not be used twice in a printf statement
with different TBFs, since the same baffer will be used for each.
This commit puts the text buffer into struct gprs_rlcmac_tbf to avoid
this problem.
Sponsored-by: On-Waves ehf
-----------------------------------------------------------------------
Summary of changes:
src/gprs_rlcmac_sched.cpp | 29 +++++++++++++++++++-----
src/tbf.cpp | 56 +++++++++++++++++++++++++++++------------------
src/tbf.h | 5 +++++
tests/tbf/TbfTest.err | 6 ++---
4 files changed, 65 insertions(+), 31 deletions(-)
hooks/post-receive
--
UNNAMED PROJECT