This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "A/B/C Netz". The branch, master has been updated via 3e86ef95c4d522ea45dbb49f266a47bf41c33452 (commit) via 19afb792b55e80e62a3bb7d9ae2cfb770ecec773 (commit) via 50b2021d2168917d9fc395abb03d05fff5d36486 (commit) via dbdedfe1a16926d23ad7d066ea81159690956084 (commit) via d23672354f7087b81f780cd6f62db0319fb73c85 (commit) via 329463bb8c5c14a1f54f0a057bacaf1441f01ed0 (commit) via aef4cf09977a7b58d0b3e3671da7aa6b3ae6405c (commit) via e0534db15cb04360bb22e63ac5878d323f71ba34 (commit) via e653475ff7e541540cb1e9a228d36779b09d722f (commit) via 57d4d1739eed6bb908577f2aef9a4d952387df05 (commit) via 6adfcf74664a30021f12cc84e00a7cd471ee81a1 (commit) via bb64c6b3ba80f8ef844bae59e270ca9e3b43d1fd (commit) via 2c1ab897232fdcbf11a9a9cc74562a1d7221a517 (commit) via fc3b3e07be34b1daacd968a9a9e4be5b6db7818e (commit) via 56024b384b01a287ce00c43463590a28c3ca8c32 (commit) via 76a3484c5c90cf5bcbcc26d4f14dbe5c062656c5 (commit) from c086e66b7cd3ad08b6840c8ea8a704d76171eabd (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmocom-analog/commit/?id=3e86ef95c4d522ea45dbb49f26... commit 3e86ef95c4d522ea45dbb49f266a47bf41c33452 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Sat Jun 10 17:49:59 2017 +0200 B-Netz: Minor printf fix http://cgit.osmocom.org/osmocom-analog/commit/?id=19afb792b55e80e62a3bb7d9ae... commit 19afb792b55e80e62a3bb7d9ae2cfb770ecec773 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Sat Jun 10 17:11:47 2017 +0200 NMT: Fix and adjustements to supervisory signal detection http://cgit.osmocom.org/osmocom-analog/commit/?id=50b2021d2168917d9fc395abb0... commit 50b2021d2168917d9fc395abb03d05fff5d36486 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Fri Jun 9 20:18:24 2017 +0200 NMT 450: Support for other European counties, like Belgium, Czech, Slovakia http://cgit.osmocom.org/osmocom-analog/commit/?id=dbdedfe1a16926d23ad7d066ea... commit dbdedfe1a16926d23ad7d066ea81159690956084 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Sun Jun 4 16:11:13 2017 +0200 AMPS: Fixed selecting right CRC values for FOCC words http://cgit.osmocom.org/osmocom-analog/commit/?id=d23672354f7087b81f780cd6f6... commit d23672354f7087b81f780cd6f62db0319fb73c85 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Sun Jun 4 12:18:49 2017 +0200 Add option to set MNCC socket name (to run multiple base stations) http://cgit.osmocom.org/osmocom-analog/commit/?id=329463bb8c5c14a1f54f0a057b... commit 329463bb8c5c14a1f54f0a057bacaf1441f01ed0 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Wed May 31 18:14:20 2017 +0200 SDR: Add option to give channel number Using SoapySDR server allows to run different networks on multi channel SDR devices. http://cgit.osmocom.org/osmocom-analog/commit/?id=aef4cf09977a7b58d0b3e3671d... commit aef4cf09977a7b58d0b3e3671da7aa6b3ae6405c Author: Andreas Eversberg <jolly@eversberg.eu> Date: Wed May 31 08:35:13 2017 +0200 Make spectrum display nicer by plotting continuous lines between samples http://cgit.osmocom.org/osmocom-analog/commit/?id=e0534db15cb04360bb22e63ac5... commit e0534db15cb04360bb22e63ac5878d323f71ba34 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Wed May 31 08:33:47 2017 +0200 Make spectrum display a little nicer by using '|' instead of ':' http://cgit.osmocom.org/osmocom-analog/commit/?id=e653475ff7e541540cb1e9a228... commit e653475ff7e541540cb1e9a228d36779b09d722f Author: Andreas Eversberg <jolly@eversberg.eu> Date: Sun May 28 09:35:47 2017 +0200 NMT: Allow NULL (B'0000') to be used as country selector in traffic area http://cgit.osmocom.org/osmocom-analog/commit/?id=57d4d1739eed6bb908577f2aef... commit 57d4d1739eed6bb908577f2aef9a4d952387df05 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Fri May 26 07:27:30 2017 +0200 AMPS/C-Netz: Correctly release pending transaction when creating a new one If transactions is created, look on all channels for pending transaction with same subscriber. 1. Remove that transaction. 2. Make channel return to IDLE. 3. Release call, if callref exists. http://cgit.osmocom.org/osmocom-analog/commit/?id=6adfcf74664a30021f12cc84e0... commit 6adfcf74664a30021f12cc84e00a7cd471ee81a1 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Thu May 25 18:43:54 2017 +0200 Status display Alows to show status of current channels and users http://cgit.osmocom.org/osmocom-analog/commit/?id=bb64c6b3ba80f8ef844bae59e2... commit bb64c6b3ba80f8ef844bae59e270ca9e3b43d1fd Author: Andreas Eversberg <jolly@eversberg.eu> Date: Thu May 25 09:57:22 2017 +0200 AMPS: Add DTX support When DTX is enabled (-S dtx=2 or 3), a missing SAT tone causes the receiver to mute audio and insert a low level of comfort noise. Also the missing SAT tone will not cause the connection to be terminated. http://cgit.osmocom.org/osmocom-analog/commit/?id=2c1ab897232fdcbf11a9a9cc74... commit 2c1ab897232fdcbf11a9a9cc74562a1d7221a517 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Wed May 24 14:01:25 2017 +0200 Notify about usage of channels that are next to each other It is required to have at least one free channel between channels, to avoid interferences. This is only a warning, it will not reject channels next to each other. http://cgit.osmocom.org/osmocom-analog/commit/?id=fc3b3e07be34b1daacd968a9a9... commit fc3b3e07be34b1daacd968a9a9e4be5b6db7818e Author: Andreas Eversberg <jolly@eversberg.eu> Date: Wed May 24 14:00:08 2017 +0200 Finetuning LOSS (noise) detection The algorithm is still bad, but works in most cases http://cgit.osmocom.org/osmocom-analog/commit/?id=56024b384b01a287ce00c43463... commit 56024b384b01a287ce00c43463590a28c3ca8c32 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Sun May 21 16:40:10 2017 +0200 AMPS: Serveral minor fixes http://cgit.osmocom.org/osmocom-analog/commit/?id=76a3484c5c90cf5bcbcc26d4f1... commit 76a3484c5c90cf5bcbcc26d4f14dbe5c062656c5 Author: Andreas Eversberg <jolly@eversberg.eu> Date: Fri May 19 19:11:59 2017 +0200 C-Netz: Make demodulation algorithm (slope or leve) slectable via option By default (auto), the algorithm is selected, depending on sound card or SDR usage. For testing and debugging purpose, the algorithm can be forced. ----------------------------------------------------------------------- Summary of changes: src/amps/amps.c | 94 ++++++++++++++---- src/amps/amps.h | 15 ++- src/amps/dsp.c | 49 +++++---- src/amps/frame.c | 58 ++++++----- src/amps/main.c | 22 ++++- src/amps/sysinfo.c | 4 +- src/amps/sysinfo.h | 2 +- src/amps/transaction.c | 64 ++++++++++-- src/amps/transaction.h | 2 + src/anetz/anetz.c | 24 ++++- src/bnetz/bnetz.c | 30 ++++-- src/bnetz/main.c | 2 +- src/cnetz/cnetz.c | 25 ++++- src/cnetz/cnetz.h | 4 +- src/cnetz/dsp.c | 4 +- src/cnetz/dsp.h | 2 +- src/cnetz/fsk_demod.c | 15 ++- src/cnetz/fsk_demod.h | 1 + src/cnetz/main.c | 39 +++++++- src/cnetz/transaction.c | 58 ++++++++++- src/cnetz/transaction.h | 1 + src/common/Makefile.am | 1 + src/common/debug.c | 2 + src/common/display.h | 10 ++ src/common/display_spectrum.c | 10 +- src/common/display_status.c | 147 +++++++++++++++++++++++++++ src/common/display_wave.c | 93 +++++++++++++++--- src/common/loss.c | 2 +- src/common/main_common.c | 64 +++++++++--- src/common/sdr.c | 8 +- src/common/sdr.h | 2 +- src/common/sender.c | 6 ++ src/common/soapy.c | 3 +- src/common/soapy.h | 2 +- src/common/uhd.c | 3 +- src/common/uhd.h | 2 +- src/nmt/Makefile.am | 1 + src/nmt/countries.c | 224 ++++++++++++++++++++++++++++++++++++++++++ src/nmt/countries.h | 7 ++ src/nmt/dsp.c | 15 +-- src/nmt/dsp.h | 2 +- src/nmt/frame.c | 33 +++++-- src/nmt/main.c | 71 ++++++------- src/nmt/nmt.c | 147 +++++++++------------------ src/nmt/nmt.h | 5 +- 45 files changed, 1063 insertions(+), 312 deletions(-) create mode 100644 src/common/display_status.c create mode 100644 src/nmt/countries.c create mode 100644 src/nmt/countries.h hooks/post-receive -- A/B/C Netz