This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, staging has been created at 0fcfb5ea0ab84e73f99496ef5ba8a2a2c8c059ca (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=0fcfb5ea0ab84e73f99496ef5ba8a2a2... commit 0fcfb5ea0ab84e73f99496ef5ba8a2a2c8c059ca Author: Tom Tsou <tom@tsou.cc> Date: Wed Dec 3 18:47:20 2014 -0800 Transceiver52M: Add X300/X310 and E310 USRP support Add device detection and timing values. Signed-off-by: Tom Tsou <tom@tsou.cc> http://cgit.osmocom.org/osmo-trx/commit/?id=eb54bddf47e087cf340c8a65b36a03ce... commit eb54bddf47e087cf340c8a65b36a03cebd4f174b Author: Tom Tsou <tom@tsou.cc> Date: Tue Nov 25 16:06:32 2014 -0800 Transceiver52M: Implement POWEROFF command Add stop and restart capability through the POWEROFF and POWERON commands. Calling stop causes receive streaming to cease, and I/O threads to shutdown leaving only the control handling thread running. Upon receiving a POWERON command, I/O threads and device streaming are restarted. Proper shutdown of the transceiver is now initiated by the destructor, which calls the stop command internally to wind down and deallocate threads. Signed-off-by: Tom Tsou <tom@tsou.cc> http://cgit.osmocom.org/osmo-trx/commit/?id=a4d1a4124421473f5f92255e2f3bc44b... commit a4d1a4124421473f5f92255e2f3bc44bfa3937ea Author: Tom Tsou <tom@tsou.cc> Date: Tue Nov 25 15:46:56 2014 -0800 Transceiver52M: Allow setting gain before POWERON There is no reason gain settings should not be modifiable when the radio is running or not. Signed-off-by: Tom Tsou <tom@tsou.cc> http://cgit.osmocom.org/osmo-trx/commit/?id=b99975917585dc8973cc806a5da0aa3f... commit b99975917585dc8973cc806a5da0aa3fc791b198 Author: Tom Tsou <tom@tsou.cc> Date: Fri Nov 21 12:25:22 2014 -0800 CommonLibs: Add thread cancellation capability For clean shutdown in the transceiver we need to cancel and join running threads for orderly unwinding. Thread cancellation points already exist, so we just need to be able to call on the threads to exit out when stopping or shutting down. Don't error when joining a NULL thread, which would be the case if a thread was stopped before ever being started to begin with. Signed-off-by: Tom Tsou <tom@tsou.cc> ----------------------------------------------------------------------- hooks/post-receive -- OpenBTS' transceiver retro-fit