This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, master has been updated via 0fe41a583cb95ad3aaedc3fa6e99fa73755662f4 (commit) via a5e0f1cdba850d50a6743ec3aeaa565b25db0465 (commit) from 2c650a6895f573e4455f55f0d1ed136ba8ae4744 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=0fe41a583cb95ad3aaedc3fa6e99fa73... commit 0fe41a583cb95ad3aaedc3fa6e99fa73755662f4 Author: Tom Tsou <tom.tsou@ettus.com> Date: Tue May 3 15:14:45 2016 -0700 uhd: Set default Tx sampling to 4 sps The majority of GSM host platforms are capable of operating with the 4x oversampled modulator, which justifies the new default setting. The small number exceptions (e.g. Raspberry Pi) can still use the lower complexity 1 sps modulator with the '-s 1' command line option if required. Signed-off-by: Tom Tsou <tom.tsou@ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=a5e0f1cdba850d50a6743ec3aeaa565b... commit a5e0f1cdba850d50a6743ec3aeaa565b25db0465 Author: Tom Tsou <tom.tsou@ettus.com> Date: Tue May 3 15:14:06 2016 -0700 uhd: Update default E3XX settings Tune timing values after testing on UHD 003.009.002 for E3XX. Table value for 1 sps was off by 10 samples causing improper operation. Table value for 4 sps was shifted by 1 sample for more accurate timing. Also update E3XX description string detection. Signed-off-by: Tom Tsou <tom.tsou@ettus.com> ----------------------------------------------------------------------- Summary of changes: Transceiver52M/UHDDevice.cpp | 9 +++++---- Transceiver52M/osmo-trx.cpp | 7 +------ 2 files changed, 6 insertions(+), 10 deletions(-) hooks/post-receive -- OpenBTS' transceiver retro-fit