This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, fairwaves/rebase has been created at e3d81d7ccb2f2315a162ed2a8985745740d3df12 (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=e3d81d7ccb2f2315a162ed2a89857457… commit e3d81d7ccb2f2315a162ed2a8985745740d3df12 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Sun Mar 31 12:01:25 2013 +0200 osmo-nitb support for codec negotiation The caller's most preferred codec is selected out of the union of codecs, which both parties support. Since codec negotiation is done automatically, there is no need to define codec for TCH/F and TCH/H via VTY anymore. Conflicts: openbsc/src/libmsc/gsm_04_08.c openbsc/src/libmsc/vty_interface_layer3.c http://cgit.osmocom.org/openbsc/commit/?id=bb463820c17556260ca1e19c2b7d487a… commit bb463820c17556260ca1e19c2b7d487aa49ca6e9 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Sun Mar 31 11:57:38 2013 +0200 If requested TCH/H channel is not available, try assigning TCH/F If MNCC application requests a half rate channel, the channel might not be available, due to different cell configuration, so the full rate channel is used instead. http://cgit.osmocom.org/openbsc/commit/?id=3ca5635879a026c885de9e23b7eb6f07… commit 3ca5635879a026c885de9e23b7eb6f079d0c3b3b Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Sun Mar 31 11:44:34 2013 +0200 Fix: If paging for half rate was requested, use hr, if supported by MS http://cgit.osmocom.org/openbsc/commit/?id=0380f7234004d530ff5b2f712b332b7f… commit 0380f7234004d530ff5b2f712b332b7f49ddb965 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Sun Jan 19 11:47:44 2014 +0100 Add full AMR multirate IE support with VTY config for MS and BTS side Conflicts: openbsc/include/openbsc/gsm_data_shared.h openbsc/src/libbsc/bsc_vty.c openbsc/src/libbsc/chan_alloc.c http://cgit.osmocom.org/openbsc/commit/?id=c33c3797fd8992bd978e98cda3de65d5… commit c33c3797fd8992bd978e98cda3de65d5d15c3463 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Thu Mar 14 09:41:18 2013 +0100 Drop bad speech frames rather than forwarding them via RTP Some RTP endpoints may not check for bad frame indications, so a frame that is marked as bad may be still forwarded, which creates anoying noise. This patch drops these frames. It depends on the other RTP endpoint how dropped frames are handled. (insert silence, extrapolate speech...) http://cgit.osmocom.org/openbsc/commit/?id=eb355c2c7066d0193a4b86882691eef8… commit eb355c2c7066d0193a4b86882691eef83e55d969 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Mon Mar 11 08:20:48 2013 +0100 Add check for non existing lchan at tch_frame_down() Traffic cannot sent to BTS, if there is (currently) no logical channel associated with the transaction. This happens, if TCH traffic is received from upper layer, but there is no lchan available before completing immediate assignment, handover or assignment process. http://cgit.osmocom.org/openbsc/commit/?id=2f05ed0fa8a06986901db5a3af7c3b8c… commit 2f05ed0fa8a06986901db5a3af7c3b8c5e73883e Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Sun Mar 10 11:50:19 2013 +0100 Send RADIO LINK TIMEOUT value via OML attribute to BTS The same radio link timeout value is used for BTS and MS side. http://cgit.osmocom.org/openbsc/commit/?id=26ef04a779a8cbc172d83144fdb0fde9… commit 26ef04a779a8cbc172d83144fdb0fde99bab51a1 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Sun Mar 10 11:49:35 2013 +0100 Add option to set RADIO LINK TIMEOUT value via VTY http://cgit.osmocom.org/openbsc/commit/?id=6a0544b0674818bd46ed15d6e780f863… commit 6a0544b0674818bd46ed15d6e780f86318403a26 Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Fri Feb 17 15:20:59 2012 +0100 Allow dynamic RTP payload types between application and MNCC interface Since EFR/AMR/HR codecs use dynamic RTP payload, the payload type can be set. If it is set, the frame type must be set also, so OpenBSC knows what frame types are received via RTP. This modification only affects traffic beween application and MNCC interface, not the RTP traffic between OpenBSC and BTS. Conflicts: openbsc/src/libtrau/rtp_proxy.c http://cgit.osmocom.org/openbsc/commit/?id=22a9a544ba0e72f014a3f1ace7c23233… commit 22a9a544ba0e72f014a3f1ace7c23233dbe17fec Author: Andreas Eversberg <jolly(a)eversberg.eu> Date: Mon Jan 16 09:29:28 2012 +0100 Add traffic forwarding via RTP to remote application Instead of forwarding traffic through MNCC interface, traffic can be forwarded to a given RTP peer directly. A special MNCC message is used to control the peer's destination. The traffic can still be forwarded through MNCC interface when this special MNCC message is not used. It also works with E1 based BTSs. In conjunction with LCR's "rtp-bridge" feature, the RTP traffic can be directly exchanged with a remote SIP endpoint, so that the traffic is not forwarded by LCR itself. This way the performance of handling traffic only depends on OpenBSC and the remote SIP endpoint. Also the traffic is exchanged with the SIP endpoint without transcoding, to have maximum performance. Increment MNCC version to 5. Conflicts: openbsc/tests/gbproxy/gbproxy_test.c ----------------------------------------------------------------------- hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)