12 Mar
2012
12 Mar
'12
7:13 p.m.
Hello Patrick,
I am currently working on my master thesis in computer science in which
I'm trying to exploit you great open source software linux DECT-Stack.
I plan to use it for controlling a Com-On-Air PCI ISDN card
(Dosch&Amand). However, I'm facing problems with operating libdect,
dectmon. To be more precise, after installing software and trying to run
it I always get the following error message:
dect_netlink_init: Protocol mismatch
dect_init: Bad file descriptor
root@dect:~/dectmon# valgrind src/dectmon
==4479== Memcheck, a memory error detector
==4479== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al.
==4479== Using Valgrind-3.6.1-Debian and LibVEX; rerun with -h for
copyright info
==4479== Command: src/dectmon
==4479==
dectmon > ==4479== Warning: invalid file descriptor -1 in syscall close()
dect_netlink_init: Protocol mismatch
dectmon > dect_open_handle: Bad file descriptor
==4479==
==4479== HEAP SUMMARY:
==4479== in use at exit: 65,329 bytes in 189 blocks
==4479== total heap usage: 305 allocs, 116 frees, 74,326 bytes allocated
==4479==
==4479== LEAK SUMMARY:
==4479== definitely lost: 0 bytes in 0 blocks
==4479== indirectly lost: 0 bytes in 0 blocks
==4479== possibly lost: 0 bytes in 0 blocks
==4479== still reachable: 65,329 bytes in 189 blocks
==4479== suppressed: 0 bytes in 0 blocks
==4479== Rerun with --leak-check=full to see details of leaked memory
==4479==
==4479== For counts of detected and suppressed errors, rerun with: -v
==4479== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 39 from 6)
root@dect:~/dectmon#
and for any dect-command in asterisk:
No such command 'dect show portables'
Since my master degree depends highly on successful usage of your
software I want to ask you for help and would very appreciate it.
It would be very nice if you could give me an advise on how the problem
can be solved.
Please let me know if you need additional info, esp. in case the error
text is not enough for you to be able to analyze the error.
Thank you in advance!
Best Regards,
Tasha
13 Mar
13 Mar
12:51 p.m.
Did you install the corresponding kernel, enabled the DECT kernel stack
during compilation, and load the modules?
Can you execute strace src/dectmon?
Am Montag, den 12.03.2012, 19:13 +0100 schrieb Tasha:
Hello Patrick,
I am currently working on my master thesis in computer science in which
I'm trying to exploit you great open source software linux DECT-Stack.
I plan to use it for controlling a Com-On-Air PCI ISDN card
(Dosch&Amand). However, I'm facing problems with operating libdect,
dectmon. To be more precise, after installing software and trying to run
it I always get the following error message:
dect_netlink_init: Protocol mismatch
dect_init: Bad file descriptor
root@dect:~/dectmon# valgrind src/dectmon
==4479== Memcheck, a memory error detector
==4479== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al.
==4479== Using Valgrind-3.6.1-Debian and LibVEX; rerun with -h for
copyright info
==4479== Command: src/dectmon
==4479==
dectmon > ==4479== Warning: invalid file descriptor -1 in syscall close()
dect_netlink_init: Protocol mismatch
dectmon > dect_open_handle: Bad file descriptor
==4479==
==4479== HEAP SUMMARY:
==4479== in use at exit: 65,329 bytes in 189 blocks
==4479== total heap usage: 305 allocs, 116 frees, 74,326 bytes allocated
==4479==
==4479== LEAK SUMMARY:
==4479== definitely lost: 0 bytes in 0 blocks
==4479== indirectly lost: 0 bytes in 0 blocks
==4479== possibly lost: 0 bytes in 0 blocks
==4479== still reachable: 65,329 bytes in 189 blocks
==4479== suppressed: 0 bytes in 0 blocks
==4479== Rerun with --leak-check=full to see details of leaked memory
==4479==
==4479== For counts of detected and suppressed errors, rerun with: -v
==4479== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 39 from 6)
root@dect:~/dectmon#
and for any dect-command in asterisk:
No such command 'dect show portables'
Since my master degree depends highly on successful usage of your
software I want to ask you for help and would very appreciate it.
It would be very nice if you could give me an advise on how the problem
can be solved.
Please let me know if you need additional info, esp. in case the error
text is not enough for you to be able to analyze the error.
Thank you in advance!
Best Regards,
Tasha
14 Mar
14 Mar
4:03 p.m.
Hello Erik,
yes, i followed this build instruction...step-by-step
http://dect.osmocom.org/trac/dect/wiki/Build%20instructions
tud@dect:~$ sudo bash
[sudo] password for tud:
root@dect:~# uname -r
3.2.0+
root@dect:~# cd dectmon
root@dect:~/dectmon# strace src/dectmon
execve("src/dectmon", ["src/dectmon"], [/* 23 vars */]) = 0
brk(0) = 0x9f5f000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7770000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=65198, ...}) = 0
mmap2(NULL, 65198, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7760000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/lib/libSDL-1.2.so.0", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320E\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=453392, ...}) = 0
mmap2(NULL, 623568, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb76c7000
mmap2(0xb7734000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6d) = 0xb7734000
mmap2(0xb7736000, 168912, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7736000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/libreadline.so.6", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\256\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=229488, ...}) = 0
mmap2(NULL, 237188, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb768d000
mmap2(0xb76c2000, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34) = 0xb76c2000
mmap2(0xb76c6000, 3716, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb76c6000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/lib/libdect.so.0", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0PL\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=739351, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb768c000
mmap2(NULL, 201736, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb765a000
mprotect(0xb7686000, 4096, PROT_NONE) = 0
mmap2(0xb7687000, 20480, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2c) = 0xb7687000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/lib/libevent-2.0.so.5", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0000\216\0\0004\0\0\0"..., 512)
= 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=281472, ...}) = 0
mmap2(NULL, 285800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb7614000
mmap2(0xb7658000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x43) = 0xb7658000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/i386-linux-gnu/libc.so.6", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\222\1\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1552584, ...}) = 0
mmap2(NULL, 1563160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb7496000
mmap2(0xb760e000, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x178) = 0xb760e000
mmap2(0xb7611000, 10776, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7611000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/i386-linux-gnu/libm.so.6", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2604\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=169476, ...}) = 0
mmap2(NULL, 168064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb746c000
mmap2(0xb7494000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x28) = 0xb7494000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/i386-linux-gnu/libdl.so.2", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\n\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13940, ...}) = 0
mmap2(NULL, 16504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0xb7467000
mmap2(0xb746a000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2) = 0xb746a000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/lib/libesd.so.0", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`&\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=43764, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7466000
mmap2(NULL, 47696, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0xb745a000
mmap2(0xb7464000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9) = 0xb7464000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/i386-linux-gnu/libpthread.so.0", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200[\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=124745, ...}) = 0
mmap2(NULL, 107016, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb743f000
mmap2(0xb7456000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16) = 0xb7456000
mmap2(0xb7458000, 4616, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7458000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/libtinfo.so.5", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0PW\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=121024, ...}) = 0
mmap2(NULL, 124748, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb7420000
mmap2(0xb743c000, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b) = 0xb743c000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/local/lib/libnl-dect.so.3", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2008\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=161660, ...}) = 0
mmap2(NULL, 51992, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0xb7413000
mmap2(0xb741e000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0xb741e000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/local/lib/libnl.so.3", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320O\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=275044, ...}) = 0
mmap2(NULL, 95268, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0xb73fb000
mmap2(0xb7411000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15) = 0xb7411000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/lib/i386-linux-gnu/librt.so.1", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\30\0\0004\0\0\0"..., 512)
= 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=30684, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb73fa000
mmap2(NULL, 33364, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0xb73f1000
mmap2(0xb73f8000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0xb73f8000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/lib/i386-linux-gnu/libasound.so.2", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\260\1\0004\0\0\0"..., 512)
= 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=981180, ...}) = 0
mmap2(NULL, 983988, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb7300000
mmap2(0xb73ec000, 20480, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xeb) = 0xb73ec000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
open("/usr/lib/libaudiofile.so.0", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P5\0\0004\0\0\0"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=148600, ...}) = 0
mmap2(NULL, 151320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb72db000
mmap2(0xb72fd000, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x21) = 0xb72fd000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb72da000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb72d9000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb72d96c0,
limit:1048575, seg_32bit:1, contents:0, read_exec_only:0,
limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb72fd000, 4096, PROT_READ) = 0
mprotect(0xb73ec000, 16384, PROT_READ) = 0
mprotect(0xb73f8000, 4096, PROT_READ) = 0
mprotect(0xb7411000, 4096, PROT_READ) = 0
mprotect(0xb741e000, 4096, PROT_READ) = 0
mprotect(0xb743c000, 8192, PROT_READ) = 0
mprotect(0xb7456000, 4096, PROT_READ) = 0
mprotect(0xb7464000, 4096, PROT_READ) = 0
mprotect(0xb746a000, 4096, PROT_READ) = 0
mprotect(0xb7494000, 4096, PROT_READ) = 0
mprotect(0xb760e000, 8192, PROT_READ) = 0
mprotect(0xb7658000, 4096, PROT_READ) = 0
mprotect(0xb7687000, 16384, PROT_READ) = 0
mprotect(0xb76c2000, 4096, PROT_READ) = 0
mprotect(0xb7734000, 4096, PROT_READ) = 0
mprotect(0x805a000, 4096, PROT_READ) = 0
mprotect(0xb7791000, 4096, PROT_READ) = 0
munmap(0xb7760000, 65198) = 0
set_tid_address(0xb72d9728) = 1830
set_robust_list(0xb72d9730, 0xc) = 0
futex(0xbfcd11ac, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0xbfcd11ac, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 1,
NULL, b72d96c0) = -1 EAGAIN (Resource temporarily unavailable)
rt_sigaction(SIGRTMIN, {0xb7444530, [], SA_SIGINFO}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0xb74445b0, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys="Linux", node="dect", ...}) = 0
brk(0) = 0x9f5f000
brk(0x9f80000) = 0x9f80000
open("/proc/net/psched", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb776f000
read(3, "000003e8 00000040 000f4240 3b9ac"..., 1024) = 36
close(3) = 0
munmap(0xb776f000, 4096) = 0
time(NULL) = 1331736911
clock_gettime(CLOCK_MONOTONIC, {243, 525122888}) = 0
clock_gettime(CLOCK_MONOTONIC, {243, 525174361}) = 0
gettimeofday({1331736911, 703332}, NULL) = 0
getuid32() = 0
geteuid32() = 0
getgid32() = 0
getegid32() = 0
epoll_create(32000) = 3
fcntl64(3, F_GETFD) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
getuid32() = 0
geteuid32() = 0
getgid32() = 0
getegid32() = 0
socketpair(PF_FILE, SOCK_STREAM, 0, [4, 5]) = 0
fcntl64(4, F_GETFD) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
fcntl64(5, F_GETFD) = 0
fcntl64(5, F_SETFD, FD_CLOEXEC) = 0
fcntl64(4, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(5, F_SETFL, O_RDWR|O_NONBLOCK) = 0
getuid32() = 0
geteuid32() = 0
getgid32() = 0
getegid32() = 0
eventfd2(0, O_CLOEXEC) = 6
fcntl64(6, F_GETFD) = 0x1 (flags FD_CLOEXEC)
fcntl64(6, F_SETFD, FD_CLOEXEC) = 0
fcntl64(6, F_GETFL) = 0x2 (flags O_RDWR)
fcntl64(6, F_SETFL, O_RDWR|O_NONBLOCK) = 0
epoll_ctl(3, EPOLL_CTL_ADD, 6, {EPOLLIN, {u32=6, u64=6}}) = 0
rt_sigaction(SIGINT, {0xb7636c00, ~[RTMIN RT_1], SA_RESTART}, {SIG_DFL,
[], 0}, 8) = 0
epoll_ctl(3, EPOLL_CTL_ADD, 5, {EPOLLIN, {u32=5, u64=5}}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
stat64("/home/tud/.terminfo", 0xbfccfee0) = -1 ENOENT (No such file or
directory)
stat64("/etc/terminfo", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
access("/etc/terminfo/x/xterm", R_OK) = -1 ENOENT (No such file or
directory)
stat64("/lib/terminfo", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
access("/lib/terminfo/x/xterm", R_OK) = 0
open("/lib/terminfo/x/xterm", O_RDONLY|O_LARGEFILE) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=3213, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb776f000
read(7, "\32\1\34\0&\0\17\0\235\1Z\5xterm|X11 terminal e"..., 4096) = 3213
read(7, "", 4096) = 0
close(7) = 0
munmap(0xb776f000, 4096) = 0
ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
ioctl(1, TIOCGWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
ioctl(0, TIOCGWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
ioctl(0, TIOCGWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
ioctl(0, TIOCSWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=8752608, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb70d9000
mmap2(NULL, 1253376, PROT_READ, MAP_PRIVATE, 7, 0x18a) = 0xb6fa7000
close(7) = 0
stat64("/home/tud/.inputrc", 0xbfcd1020) = -1 ENOENT (No such file or
directory)
stat64("/etc/inputrc", {st_mode=S_IFREG|0644, st_size=1721, ...}) = 0
open("/etc/inputrc", O_RDONLY|O_LARGEFILE) = 7
read(7, "# /etc/inputrc - global inputrc "..., 1721) = 1721
close(7) = 0
rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0
ioctl(0, TIOCGWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
ioctl(0, TIOCSWINSZ, {ws_row=24, ws_col=80, ws_xpixel=0, ws_ypixel=0}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo
...}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig -icanon -echo
...}) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT QUIT ALRM TERM TSTP TTIN TTOU], [], 8) = 0
rt_sigaction(SIGINT, {0xb76ac600, [], 0}, {0xb7636c00, ~[KILL STOP RTMIN
RT_1], SA_RESTART}, 8) = 0
rt_sigaction(SIGTERM, {0xb76ac600, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGQUIT, {0xb76ac600, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGALRM, {0xb76ac600, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTSTP, {0xb76ac600, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTTOU, {0xb76ac600, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTTIN, {0xb76ac600, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGWINCH, {0xb76abd10, [], SA_RESTART}, {SIG_DFL, [], 0},
8) = 0
rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0
open("/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=26064, ...}) = 0
mmap2(NULL, 26064, PROT_READ, MAP_SHARED, 7, 0) = 0xb7769000
close(7) = 0
futex(0xb7610aa8, FUTEX_WAKE_PRIVATE, 2147483647) = 0
fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7768000
write(1, "dectmon > ", 10dectmon > ) = 10
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
open("/home/tud/.dectmon_history", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No
such file or directory)
epoll_ctl(3, EPOLL_CTL_ADD, 0, {EPOLLIN, {u32=0, u64=0}}) = 0
time(NULL) = 1331736911
socket(PF_NETLINK, SOCK_RAW, 22) = -1 EPROTONOSUPPORT (Protocol
not supported)
close(-1) = -1 EBADF (Bad file descriptor)
rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0
) = 4
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
write(1, "dect_netlink_init: Protocol mism"..., 37dect_netlink_init:
Protocol mismatch
) = 37
rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0
write(1, "dectmon > ", 10dectmon > ) = 10
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
dup(2) = 7
fcntl64(7, F_GETFL) = 0x2 (flags O_RDWR)
fstat64(7, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7767000
_llseek(7, 0, 0xbfcd0fb4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(7, "dect_open_handle: Bad file descr"..., 38dect_open_handle: Bad
file descriptor
) = 38
close(7) = 0
munmap(0xb7767000, 4096) = 0
exit_group(1) = ?
root@dect:~/dectmon#
Am 13.03.2012 12:51, schrieb Erik Tews:
Did you install the corresponding kernel, enabled the
DECT kernel stack
during compilation, and load the modules?
Can you execute strace src/dectmon?
Am Montag, den 12.03.2012, 19:13 +0100 schrieb Tasha:
> Hello Patrick,
>
> I am currently working on my master thesis in computer science in which
> I'm trying to exploit you great open source software linux DECT-Stack.
> I plan to use it for controlling a Com-On-Air PCI ISDN card
> (Dosch&Amand). However, I'm facing problems with operating libdect,
> dectmon. To be more precise, after installing software and trying to run
> it I always get the following error message:
>
> dect_netlink_init: Protocol mismatch
> dect_init: Bad file descriptor
>
> root@dect:~/dectmon# valgrind src/dectmon
> ==4479== Memcheck, a memory error detector
> ==4479== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al.
> ==4479== Using Valgrind-3.6.1-Debian and LibVEX; rerun with -h for
> copyright info
> ==4479== Command: src/dectmon
> ==4479==
> dectmon> ==4479== Warning: invalid file descriptor -1 in syscall close()
> dect_netlink_init: Protocol mismatch
> dectmon> dect_open_handle: Bad file descriptor
> ==4479==
> ==4479== HEAP SUMMARY:
> ==4479== in use at exit: 65,329 bytes in 189 blocks
> ==4479== total heap usage: 305 allocs, 116 frees, 74,326 bytes allocated
> ==4479==
> ==4479== LEAK SUMMARY:
> ==4479== definitely lost: 0 bytes in 0 blocks
> ==4479== indirectly lost: 0 bytes in 0 blocks
> ==4479== possibly lost: 0 bytes in 0 blocks
> ==4479== still reachable: 65,329 bytes in 189 blocks
> ==4479== suppressed: 0 bytes in 0 blocks
> ==4479== Rerun with --leak-check=full to see details of leaked memory
> ==4479==
> ==4479== For counts of detected and suppressed errors, rerun with: -v
> ==4479== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 39 from 6)
> root@dect:~/dectmon#
>
>
> and for any dect-command in asterisk:
>
> No such command 'dect show portables'
>
>
> Since my master degree depends highly on successful usage of your
> software I want to ask you for help and would very appreciate it.
>
> It would be very nice if you could give me an advise on how the problem
> can be solved.
>
> Please let me know if you need additional info, esp. in case the error
> text is not enough for you to be able to analyze the error.
>
> Thank you in advance!
>
> Best Regards,
>
> Tasha
>
>
8:17 p.m.
Can you double check that the correct kernel is running and the dect
module has been loaded?
Did you compile DECT support as a module? If so, does dect show up in
lsmod?
Am Mittwoch, den 14.03.2012, 16:03 +0100 schrieb Tasha:
socket(PF_NETLINK, SOCK_RAW, 22) = -1
EPROTONOSUPPORT
(Protocol
not supported)
4846
days inactive
4848
days old
3 comments
2 participants
participants (2)
-
Erik Tews -
Tasha