This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Andy Avtushenko andy.avtushenko at gmail.comHi Jijo. Could you please send openbsc.cfg also you can use "locate" to find a logs. run something like locate osmo-trx either locate current 2015-05-21 4:47 GMT-08:00 Joe Ge <jijo123789 at gmail.com>: > Hi Andy, > > That setup seemed to have worked for me once I rebuilt it again. > But I'm still facing the same error as stated by Amber & Sarosh > The 2nd BTS refuses to take the configuration of "bts 1". I have tried to > run the 2nd BTS on the same machine as well as from a networked machine. > > > ------------------------------------------------------------------------------------------ > root at nistws4:/home/nist-ws4# osmobts-trx -c /root/.osmocom/ho_bts1.cfg > ((*)) > | > / \ OsmoBTS > Using MAC address of eth0: '40:a8:f0:63:c7:b6' > <0006> scheduler.c:212 Init scheduler for trx=0 > <000b> trx_if.c:493 Open transceiver for trx=0 > <000b> trx_if.c:504 Waiting for transceiver send clock > There is no such command. > Error occurred during reading below line: > band DCS1800 > > % Unknown BTS number 1 (num 1) > Failed to parse the config file: '/root/.osmocom/ho_bts1.cfg' > > ------------------------------------------------------------------------------------------ > > > > Configuration file for ho_bts1.cfg is as follows: > > ------------------------------------------------------------------------------------------ > bts 1 > band DCS1800 > ipa unit-id 1802 0 > oml remote-ip 172.30.1.10 > rtp bind-ip 172.30.1.10 > rtp jitter-buffer 0 > paging lifetime 0 > gsmtap-sapi bcch > gsmtap-sapi ccch > gsmtap-sapi rach > gsmtap-sapi agch > gsmtap-sapi pch > gsmtap-sapi sdcch > gsmtap-sapi pacch > gsmtap-sapi pdtch > gsmtap-sapi sacch > fn-advance 20 > ms-power-loop -60 > timing-advance-loop > trx 0 > rxgain 0 > power 0 > > ------------------------------------------------------------------------------------------ > > > Can you please suggest some alternatives? > > Thanks and Regards, > Jijo > > On Thu, May 21, 2015 at 12:06 PM, Joe Ge <jijo123789 at gmail.com> wrote: > >> Hi Andy, >> >> There are no logs in the location you specified. >> Does it need to be activated somehow(debug mode)??? >> What might be the problem? >> >> Regards, >> Jijo >> >> On Wed, May 20, 2015 at 9:29 PM, Andy Avtushenko < >> andy.avtushenko at gmail.com> wrote: >> >>> Hello Jijo >>> Could you please provide us a osmo-trx logs >>> located in var/logs/osmo-trx/current >>> thanks >>> >>> 2015-05-20 4:34 GMT-08:00 Jijo <jijo123789 at gmail.com>: >>> >>>> Hi Alexander, >>>> >>>> I'm working on a similar setup as Amber & Sarosh, till about recently I >>>> was >>>> facing the same error as these guys (where the config file was not >>>> parsing >>>> the trx 1 and later sections) when I stumbled upon your response. >>>> Now I've installed the same versions as suggested by you : >>>> osmo_trx: fairwaves/master >>>> libosmocore: master >>>> libosmo-abis: fairwaves/master >>>> libsmpp34: master >>>> osmo_bts: fairwaves/debian >>>> openbsc: fairwaves/master >>>> >>>> But somehow my osmobts-trx is not recognizing osmo-trx >>>> >>>> -------------------------------------------------------- >>>> <0001> oml.c:419 L3=0x94eb07e, VAL=0x94eb0ad, DIF=47 >>>> <0001> oml.c:790 ADM state already was Unlocked >>>> <0001> oml.c:790 ADM state already was Unlocked >>>> <0001> oml.c:790 ADM state already was Unlocked >>>> <0001> oml.c:790 ADM state already was Unlocked >>>> <000b> trx_if.c:187 No response from transceiver for trx=0 >>>> <000b> trx_if.c:187 No response from transceiver for trx=0 >>>> <000b> trx_if.c:187 No response from transceiver for trx=0 >>>> <000b> trx_if.c:187 No response from transceiver for trx=0 >>>> -------------------------------------------------------- >>>> >>>> I'm using UmDESK for this setup. >>>> PS- I built osmo-bts with(./configure --enable-trx). I hope that was >>>> correct >>>> for UmDESK >>>> Can you help with this regard? >>>> >>>> Thanks and Regards, >>>> Jijo >>>> >>>> >>>> >>>> >>> >>> >>> -- >>> Best regards, >>> Andy >>> >> >> > -- Best regards, Andy -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20150521/0007ccbe/attachment.htm>