This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Alexander Chemeris alexander.chemeris at gmail.comJijo, Try using "bts 0" instead of "bts 1" in the ho_bts1.cfg. Otherwise config files look correct at a first glance. On Wed, Jun 10, 2015 at 1:53 AM, Joe Ge <jijo123789 at gmail.com> wrote: > > Hi Andy and Alexander, > > Following up on the previous thread. > Were you able to recreate the issue? > > Any help would be much appreciated > > Thanks and Regards, > Jijo > > On Fri, May 22, 2015 at 9:57 AM, Joe Ge <jijo123789 at gmail.com> wrote: >> >> Hi Andy, >> I already tried the locate command on osmo-trx logs but didn't find >> anything. >> Am attaching the open-bsc.cfg(ho_bsc.cfg) file herewith. >> >> Hi Alexander, >> I'm trying to run the multi-BTS configuration as specified in: >> http://openbsc.osmocom.org/trac/wiki/multi-BTS_with_handover >> The only difference being that the 1st BTS is running in the same machine >> as the BSC(osmo-nitb) >> >> So I have 1st PC with osmo-nitb(ho_bsc.cfg), osmobts-trx(ho_bts0.cfg) and >> osmo-trx >> 2nd PC with only osmobts-trx(ho_bts1.cfg) and osmo-trx >> >> Also have you tested the handover with GPRS enabled(osmo-sgsn and >> openggsn)?? As that is my final objective. >> >> Thanks and Regards >> Jijo > > > -- Regards, Alexander Chemeris. CEO, Fairwaves, Inc. https://fairwaves.co