This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Alexander Chemeris alexander.chemeris at gmail.comJiangwy, Manoel, If you use a correct branch of osmo-trx you should't do any changes. Please check that you're using "umtrx" or "umtrx_dual_test" branch. On Mon, Sep 16, 2013 at 5:25 AM, jiangwy <wyjiang at ljshuoda.com> wrote: > ** > Hi Manoel Aposaz, > > Please edit the file transceiver52M/UHDDevice.cpp > > Changing "const double master_clk_rt = 52e6;" to > "const double master_clk_rt = 13e6; " > > Then rebuilding... > > ------------------------------ > jiangwy > > *From:* Manoel Aposaz <goorbatchev at gmail.com> > *Date:* 2013-09-16 00:27 > *To:* wyjiang <wyjiang at ljshuoda.com> > *Subject:* Re: Re: Hello > Hi wyjiang > > I need you again, please if you have time, look at this for me: > > I have got the error you got 2 month ago when you post : > > " > Hi All, > > I install all the OpenBTS and UHD packages according to manual pages. When > I start transceiver, it output some errors and exit. > > $ sudo ./transceiver 1 > linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.004.000-unknown > > > ALERT 3048163072 19:59:34.7 UHDDevice.cpp:345:set_rates: Failed to set master clock rate > > ALERT 3048163072 19:59:34.7 UHDDevice.cpp:346:set_rates: Actual clock rate 1.3e+07 > > ALERT 3048163072 19:59:34.7 runTransceiver.cpp:94:main: Transceiver exiting... > > > Jiang Wenyi > " > > Do you remember how you fix this problem ?? > > Hope to read you my friend. > > > Best regards. > > > 2013/9/12 Manoel Aposaz <goorbatchev at gmail.com> > >> ok. I thought i could test it on saturday but now, i dont really know >> what to do, if i had to order again for antennas i think i will take time... >> >> About the problem i got when i was trying to run openBts do you have an >> idea of what can be the cause?? >> >> >> 2013/9/12 jiangwy <wyjiang at ljshuoda.com> >> >>> ** >>> yes >>> >>> ------------------------------ >>> jiangwy >>> >>> *From:* Manoel Aposaz <goorbatchev at gmail.com> >>> *Date:* 2013-09-12 23:42 >>> *To:* wyjiang <wyjiang at ljshuoda.com> >>> *Subject:* Re: Re: Hello >>> Thanks for yours answers but i want to know, for a simple test to >>> connect two phones, do i need four antennas?? >>> >>> >>> 2013/9/12 jiangwy <wyjiang at ljshuoda.com> >>> >>>> ** >>>> You must buy 2 more antennas by yourself. >>>> You may not using GPS. >>>> >>>> ------------------------------ >>>> jiangwy >>>> >>>> *From:* Manoel Aposaz <goorbatchev at gmail.com> >>>> *Date:* 2013-09-12 23:10 >>>> *To:* wyjiang <wyjiang at ljshuoda.com> >>>> *Subject:* Re: Re: Hello >>>> it is all what i receive with the package.. >>>> >>>> And about GPS i did't get really what your are meaning...where will i >>>> connect it?? >>>> >>>> >>>> 2013/9/12 jiangwy <wyjiang at ljshuoda.com> >>>> >>>>> ** >>>>> >>>>> ------------------------------ >>>>> jiangwy >>>>> >>>>> *From:* Manoel Aposaz <goorbatchev at gmail.com> >>>>> *Date:* 2013-09-12 22:38 >>>>> *To:* wyjiang at ljshuoda.com >>>>> *Subject:* Re: Hello >>>>> Thanks Wyjian for your answer >>>>> >>>>> I have connect the four cable on the PCB and here is the picture of >>>>> it. >>>>> I still don't know how to connect them to other component such as >>>>> antennas. >>>>> Look at the image and tell me something please. >>>>> >>>>> I am waiting to read you.. >>>>> >>>>> >>>>> Best regards. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> 2013/9/12 Manoel Aposaz <goorbatchev at gmail.com> >>>>> >>>>>> Hi >>>>>> >>>>>> I am Emmanuel, i am working on an openBTS project and i have the >>>>>> umtrx module to accomplish this. I know recently you did it, i red your >>>>>> questions during this time in the mailing list, i send a message in this >>>>>> mailing list, i didn't have an answer up to know. i really need help. >>>>>> >>>>>> My question is this: >>>>>> >>>>>> 1 - i don't know how to run openbts; i went to this directory : >>>>>> openbts/trunk/apps: >>>>>> and i run it by : >>>>>> ./openbts >>>>>> but it saying that no file or directory ./openbts; >>>>>> i dont know if you have an idea of what can be the problem. i attache >>>>>> the image of the screen. >>>>>> >>>>>> 2- Secondly, i want to know how you put your openbts cables and other >>>>>> part of the package togheter, i receive the package with just an circuit, >>>>>> an antennas and 4 cables that i don't know what to do with it, also an GPS >>>>>> antenna. i don't know really how to connect them. >>>>>> >>>>>> I really need help, hope to read you. >>>>>> >>>>>> Thanks and have a nice day my friend. >>>>>> >>>>>> Best regards. >>>>>> >>>>>> >>>>> >>>> >>> >> > -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20130921/1ed62918/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: Catch930D(09-12-(09-16-09-23-42).jpg Type: image/jpeg Size: 452103 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20130921/1ed62918/attachment.jpg>