Sendsms using cli

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.

Alexander Chemeris alexander.chemeris at gmail.com
Mon Mar 25 15:20:03 UTC 2013


Joel,

If you use an external LNA you could be saturating the input of LMS.
It's hard to tell without checking your exact configuration with the
proper tools. Anyway, try decreasing rxgain to minimum and see whether
it works better.

On Sun, Mar 24, 2013 at 8:51 PM, Joel Yabut <joel.yabut at gmail.com> wrote:
> Rxgain is at 20. I have an external lna installed.
> Noise is at -23 and target is at -15
>
> Sent from my Ipad
>
> On Mar 24, 2013, at 11:25 PM, Alexander Chemeris <alexander.chemeris at gmail.com> wrote:
>
>> Joel,
>>
>> It could be because of bad Rx settings. What are your 'rxgain' and MS
>> RSSI Target?
>>
>> On Sun, Mar 24, 2013 at 7:06 PM, Joel Yabut <joel.yabut at gmail.com> wrote:
>>> Sorry, its because our ettus are having no issues with this sms wherein we have this issue with the umtrx with the new build of open bts.
>>>
>>> Sent from my Ipad
>>>
>>> On Mar 24, 2013, at 2:23 PM, Alexander Chemeris <alexander.chemeris at gmail.com> wrote:
>>>
>>>> Joel,
>>>>
>>>> These questions are actually out of topic for this mailing list. I
>>>> recommend you to report this to the OpenBTS mailing list and attach
>>>> relevant logs.
>>>>
>>>> But my comments are below anyway:
>>>>
>>>> On Sun, Mar 24, 2013 at 12:14 AM, Joel Yabut <joel.yabut at gmail.com> wrote:
>>>>> Anyone having issues with sendsms using cli commands? I have been sending test 1 to 10 and i only received 5 out of 10.
>>>>
>>>> I haven't used this command extensively, but it shouldn't be much
>>>> different from sending an SMS through smqueue.
>>>>
>>>>> Also, it does not always send a welcome message to my phones when camping.
>>>>
>>>> It sends welcome message only to phones which a cell sees for the
>>>> first time, i.e. the ones which are not present at the TMSI table. Try
>>>> clearing TMSI table before your experiments.
>>>>
>>>> --
>>>> Regards,
>>>> Alexander Chemeris.
>>>> CEO, Fairwaves LLC / ООО УмРадио
>>>> http://fairwaves.ru
>>
>>
>>
>> --
>> Regards,
>> Alexander Chemeris.
>> CEO, Fairwaves LLC / ООО УмРадио
>> http://fairwaves.ru



-- 
Regards,
Alexander Chemeris.
CEO, Fairwaves LLC / ООО УмРадио
http://fairwaves.ru




More information about the UmTRX mailing list