This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Sylvain Munaut 246tnt at gmail.com>>> As known, hardware developing impossible without soldering iron.
>>> With UmTRXv2 I found that was used very infusible solder paste.
>>> As I understand it is due to compliance to Pb-free.
>>
>> Please note that RoHS is not a requirement in Europe for telecom
>> equipment! So if you have a SMT factory that still uses solder with Pb,
>> you can avoid those issues.
>
> You mean it's a requirement only for consumer electronics? Didn't know that.
The exact rules are a bit more complicated than this, but yes, there
is a lot of exemptions from RoHS.
Cheers,
Sylvain