This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Alexander Chemeris alexander.chemeris at gmail.comOn Wed, Nov 7, 2012 at 9:12 PM, Harald Welte <hwelte at sysmocom.de> wrote: > On Wed, Nov 07, 2012 at 08:54:29PM +0400, Andrey Sviyazov wrote: >> As known, hardware developing impossible without soldering iron. >> With UmTRXv2 I found that was used very infusible solder paste. >> As I understand it is due to compliance to Pb-free. > > Please note that RoHS is not a requirement in Europe for telecom > equipment! So if you have a SMT factory that still uses solder with Pb, > you can avoid those issues. You mean it's a requirement only for consumer electronics? Didn't know that. -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru