Next UmTRXv2 batch

Andrey Sviyazov andreysviyaz at gmail.com
Wed Nov 7 18:11:09 UTC 2012


I use this
<http://www.boilpass.com/lukey-702-digital-hot-air-rework-station-solder_p4611.html>rework
station (it doesn't advertising).
I can work with almost all components (except BGA and so on), but feel
smell of burned FR-4 :)


Best regards,
Andrey Sviyazov.



2012/11/7 Robin Coxe <coxe at close-haul.com>

> Just another data point...  I used PbFree solder paste on the GAPfiller
> boards, but did all of the fixes using leaded solder.   It wasn't ideal,
> but it was much easier than trying to use PbFree solder for modifications.
>
>
> On Wed, Nov 7, 2012 at 12:27 PM, Sylvain Munaut <246tnt at gmail.com> wrote:
>
>> > Seems so.
>> > Do you know low fusible lead free solder paste ?
>>
>> No unfortnately all the lead free board I worked with sucked from that
>> PoV :(
>> When you have to rework anything connected to a ground plane, it's
>> hell to avoid burning the FR4, lifting traces, ...
>>
>> Cheers,
>>
>>     Sylvain
>>
>>
>
>
> --
> Robin Coxe  |  Close-Haul Communications, Inc.  |  Boston, MA
> +1-617-470-8825
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20121107/f003b40f/attachment.html>


More information about the UmTRX mailing list