This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-net-gprs@lists.osmocom.org/.
XINKE ZHANG xinke.zhang at hotmail.comGPSDO is mounted upon the B210. And I executes this command "./osmo-trx -g -e". My timeslot config is 3 TCH/F + 3 PDCH. ________________________________ From: Neels Hofmeyr <nhofmeyr at sysmocom.de> Sent: Thursday, March 1, 2018 12:27 To: XINKE ZHANG Cc: osmocom-net-gprs at lists.osmocom.org Subject: Re: Data Rate of EGPRS is Too Low On Wed, Feb 28, 2018 at 12:53:21AM +0000, XINKE ZHANG wrote: > Hi all, > > > I have set up the EGPRS network using software bundles (osmo-nitb + osmo-bts-trx + osmo-trx + osmo-pcu + osmo-sgsn + openggsn) based on the USRP B210 platform. Now the cell phone can connect to the EGPRS network, but the network is not stable and the data rate is too low (only about 8kbs). - do you have a proper timing source connected to the B210? - what's your timeslot config? ~N -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/osmocom-net-gprs/attachments/20180301/e0d2ac49/attachment.htm>