PDTCH and PTCCH activation

[Max]

This code is not referenced anywhere.

On 07/21/2016 08:50 AM, Harald Welte wrote:
> Hi Max,
>
> On Wed, Jul 20, 2016 at 06:50:24PM +0200, Max wrote:
>
>> Notice that while PDTCH is activated for both UL and DL, the PTCCH is
>> only activated for DL.
>>
>> As far as I've understood continuous TA procedure I've got to have PTCCH
>> activated in both directions. The problem is that I have troubles
>> locating the code which triggers the activation above.
> from osmo-bts/src/osmo-bts-sysmo/oml.c:
>
> static const struct sapi_dir pdtch_sapis[] = {
>         { GsmL1_Sapi_Pdtch,»····GsmL1_Dir_TxDownlink },
>         { GsmL1_Sapi_Pdtch,»····GsmL1_Dir_RxUplink },
>         { GsmL1_Sapi_Ptcch,»····GsmL1_Dir_TxDownlink },
>         { GsmL1_Sapi_Prach,»····GsmL1_Dir_RxUplink },
> #if 0
>         { GsmL1_Sapi_Ptcch,»····GsmL1_Dir_RxUplink },
>         { GsmL1_Sapi_Pacch,»····GsmL1_Dir_TxDownlink },
> #endif
>
> I don't know exactly why it is commented out, probably because itw as
> simply not used at the time?
>

-- 
Max Suraev <msuraev at sysmocom.de> http://www.sysmocom.de/
======================================================================= 
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93 
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B 
* Geschaeftsfuehrer / Managing Director: Harald Welte