This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Ernesto Sanchez xload.es at gmail.comA lot of thanks Mykola, I tried to: - Find the nano3G ip address, I found it and create a rule in my dhcp server to assign a fixed ip address. - Ping the nano3G: 0% packet loss. - Scan all TCP ports with nmap: there is no open port - Capture all network traffic from nano3Gwith tcpdump: it connect to a T-mobile to perform a isakmp handshake without any result, also get the date and time from some ntp servers. - Perform a factory reset but I think that this action just restore the custom operator firmware, at this step the nano3g also connect to ip.access servers and download some crl certificates, then also try the isakmp handshake with T-mobile server. Best regards 2018-07-25 9:41 GMT+02:00 Mykola Shchetinin <mykola at razormaker.com>: > Good day, Ernesto > > > it seem to have a custom firmware for an operator that does not work in > my country > > How have you found that out? What actions have you taken? Have you > performed a factory reset? > > If you expand on the description of your problem, then it will be much > easier for someone here to help you. > > With best wishes, Mykola > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20180725/99dc5eae/attachment.htm>