<div dir="ltr"><div>A lot of thanks Mykola, I tried to:</div><div>- Find the nano3G ip address, I found it and create a rule in my dhcp server to assign a fixed ip address.</div><div>- Ping the nano3G: 0% packet loss.</div><div>- Scan all TCP ports with nmap: there is no open port</div><div>- Capture all network traffic from nano3Gwith tcpdump: it connect to a T-mobile to perform a isakmp handshake without any result, also get the date and time from some ntp servers.<br></div><div>- Perform a factory reset but I think that this action just restore the custom operator firmware, at this step the nano3g also connect to ip.access servers and download some crl certificates, then also try the isakmp handshake with T-mobile server.</div><div><br></div><div>Best regards<br></div></div><div class="gmail_extra"><br><div class="gmail_quote">2018-07-25 9:41 GMT+02:00 Mykola Shchetinin <span dir="ltr"><<a href="mailto:mykola@razormaker.com" target="_blank">mykola@razormaker.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div dir="auto">Good day, Ernesto</div></div><span class=""><div dir="auto"><br></div><div dir="auto">>  it seem to have a custom firmware for an operator that does not work in my country</div><div dir="auto"><br></div></span><div dir="auto">How have you found that out? What actions have you taken? Have you performed a factory reset?</div><div dir="auto"><br></div><div dir="auto">If you expand on the description of your problem, then it will be much easier for someone here to help you.</div><div dir="auto"><br></div><div dir="auto">With best wishes, Mykola</div>
</blockquote></div><br></div>