This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Holger Adams holger at kernreaktor.orgHi Dieter, Am Do, 19.03.2009, 18:40, schrieb Dieter Spaar: > On Thu, 19 Mar 2009 17:25:15 +0100, "Holger Adams" > <holger at kernreaktor.org> wrote: >> >> I remember that one TRX wasn't ('No Load') loaded. Phase 3 was reached. > > If this is the first one, it won't work because this is the one OpenBSC > uses in the moment. If it is not loaded you should switch off and on > the BS-11 and check if it works afterwards. On my BS-11 there seems > to be a temperature related problem which sometimes requires quite a > few restarts to get the first TRX loaded. Additionally it could be > that an attached RS232 cable disturbs the startup process. I switched to my second BS-11, there TRX1 seems to get loaded. There are still some problems of getting the TRX started (sorry for keep bugging, but it doesn't make real fun to start developing without a working fundament). Output of 'bsc_hack' <1000> input/misdn.c:123 alen =6, dev(0) channel(3) sapi(0) tei(1) <1000> input/misdn.c:126 <= len = 15, prim(0x3008) id(0x30100): DL_DATA_IND <1000> input/misdn.c:151 RX: 0c 12 01 90 0f 00 3c <1000> input/misdn.c:123 alen =6, dev(0) channel(3) sapi(0) tei(1) <1000> input/misdn.c:126 <= len = 20, prim(0x3008) id(0x30100): DL_DATA_IND <1000> input/misdn.c:151 RX: 0c 12 01 88 12 06 00 fa 00 00 00 00 <1000> input/misdn.c:123 alen =6, dev(0) channel(3) sapi(0) tei(1) <1000> input/misdn.c:126 <= len = 15, prim(0x3008) id(0x30100): DL_DATA_IND <1000> input/misdn.c:151 RX: 0c 12 01 90 0f 00 3c (...) Full Log: http://www.kernreaktor.org/stuff/bs11_bschack_with_trx1.txt E1-Trace: 08:53:15"2 1Tx> LAPD 0 1 0 20 0 0 INFO 0 CCCH(P+AG) RSL CHNIN 08:53:15"2 1Rx< LAPD 0 1 0 0 21 RR 08:53:15"2 1Tx> LAPD 0 1 0 21 0 0 INFO 0 CCCH(RACH) RSL CHNIN 08:53:15"2 1Rx< LAPD 0 1 0 0 22 RR 08:53:17"8 1Tx> LAPD 0 1 0 22 0 0 INFO 0 CCCH(P+AG) RSL CHNIN 08:53:17"8 1Rx< LAPD 0 1 0 0 23 RR (...) Full Log: http://www.kernreaktor.org/stuff/bs11_e1_with_trx1.txt I except of beeing 'DoSed' by various mobilephones lying around here, but nothing happens. I also can't see the 'OpenBSC-Test' provider on my mobilephones (manual network select). Question to Michael Gernoth: Is this the situation you had with your "new" PC? Best Regards, Holger