This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.
jenkins at lists.osmocom.org jenkins at lists.osmocom.orgSee <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,FIRMWARE_VERSION=master,WITH_MANUALS=1,a4=default,label=osmocom-master-debian9/5262/display/redirect> Changes: ------------------------------------------ [...truncated 139.51 KB...] checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... yes checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.3.0.25-8de2 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC abis.o CC logging.o CC bts.o CC rsl.o CC bts_trx.o CC oml.o gsm_data.c: In function ‘gsm_pchan2chan_nr’: gsm_data.c:239:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ abis.c: In function ‘abis_open’: abis.c:285:3: warning: ‘e1inp_line_get’ is deprecated: Use e1inp_line_get2() instead [-Wdeprecated-declarations] e1inp_line_get(line); /* We want a new reference for returned line */ ^~~~~~~~~~~~~~ In file included from abis.c:42:0: /build/deps/install/stow/libosmo-abis/include/osmocom/abis/e1_input.h:263:6: note: declared here void e1inp_line_get(struct e1inp_line *line) OSMO_DEPRECATED("Use e1inp_line_get2() instead"); ^~~~~~~~~~~~~~ CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o vty.c: In function ‘bts_dump_vty_features’: vty.c:1001:4: warning: ‘osmo_bts_feature_name’ is deprecated: Use osmo_bts_features_desc() instead [-Wdeprecated-declarations] vty_out(vty, "%-40s%s", osmo_bts_feature_name(i), VTY_NEWLINE); ^~~~~~~ In file included from ../../include/osmo-bts/gsm_data.h:21:0, from vty.c:47: /build/deps/install/stow/libosmocore/include/osmocom/gsm/bts_features.h:40:13: note: declared here const char *osmo_bts_feature_name(enum osmo_bts_features feature) ^~~~~~~~~~~~~~~~~~~~~ CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o pcu_sock.c: In function ‘pcu_tx_info_ind’: pcu_sock.c:321:2: warning: #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ pcu_sock.c:323:2: warning: #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC virtualbts_vty.o CC main.o CC bts_model.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual make[3]: Leaving directory '/build/src/osmo-bts-virtual' Making all in osmo-bts-omldummy make[3]: Entering directory '/build/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[3]: Leaving directory '/build/src/osmo-bts-omldummy' Making all in osmo-bts-trx make[3]: Entering directory '/build/src/osmo-bts-trx' CC main.o CC l1_if.o CC sched_lchan_rach.o CC scheduler_trx.o CC sched_lchan_fcch_sch.o CC trx_if.o CC sched_lchan_pdtch.o CC sched_lchan_xcch.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC trx_provision_fsm.o CC trx_vty.o CC loops.o CCLD osmo-bts-trx make[3]: Leaving directory '/build/src/osmo-bts-trx' Making all in osmo-bts-octphy make[3]: Entering directory '/build/src/osmo-bts-octphy' CC main.o CC l1_tch.o CC l1_oml.o CC l1_if.o CC octpkt.o CC octphy_hw_api.o CC l1_utils.o CC octphy_vty.o l1_oml.c: In function ‘lchan2lch_par’: l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V1_VAMOS’ not handled in switch [-Werror=switch] switch (lchan->tch_mode) { ^~~~~~ l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V2_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V3_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V5_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c: In function ‘bts_model_change_power’: l1_oml.c:1799:9: note: #pragma message: Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016) #pragma message ("Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)") ^~~~~~~ l1_if.c: In function ‘mph_info_req’: l1_if.c:661:9: note: #pragma message: Mode Modify is currently not supported for Octasic PHY (OS#3015) #pragma message ("Mode Modify is currently not supported for Octasic PHY (OS#3015)") ^~~~~~~ cc1: all warnings being treated as errors Makefile:439: recipe for target 'l1_oml.o' failed make[3]: *** [l1_oml.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/src/osmo-bts-octphy' Makefile:385: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:438: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/build' Makefile:370: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE