This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
fixeria gerrit-no-reply at lists.osmocom.orgfixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/23464 ) Change subject: BTS_Tests: cosmetic: s/f_init_pcu_test/f_init_with_pcuif/ ...................................................................... BTS_Tests: cosmetic: s/f_init_pcu_test/f_init_with_pcuif/ Change-Id: Ic95c46426ed3ac9ead645037059190fead181b31 --- M bts/BTS_Tests.ttcn 1 file changed, 20 insertions(+), 20 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/64/23464/1 diff --git a/bts/BTS_Tests.ttcn b/bts/BTS_Tests.ttcn index 1dad6c1..0ad55ce 100644 --- a/bts/BTS_Tests.ttcn +++ b/bts/BTS_Tests.ttcn @@ -4624,42 +4624,42 @@ } } -friend function f_init_pcu_test() runs on test_CT { +friend function f_init_with_pcuif() runs on test_CT { f_init(); PCU.send(t_SD_PCUIF(g_pcu_conn_id, ts_PCUIF_TXT_IND(0, PCU_VERSION, testcasename()))); } /* PDCH activation via PCU socket; check for presence of RTS.req */ testcase TC_pcu_act_req() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(0, 0, 7, true); } /* PDCH activation via PCU socket on non-PDCU timeslot */ testcase TC_pcu_act_req_wrong_ts() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(0, 0, 1, false); } /* PDCH activation via PCU socket on wrong BTS */ testcase TC_pcu_act_req_wrong_bts() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(23, 0, 7, false); } /* PDCH activation via PCU socket on wrong TRX */ testcase TC_pcu_act_req_wrong_trx() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(0, 23, 7, false); } /* PDCH deactivation via PCU socket; check for absence of RTS.req */ testcase TC_pcu_deact_req() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); /* Activate PDCH */ f_TC_pcu_act_req(0, 0, 7, true); @@ -4670,7 +4670,7 @@ /* Attempt to deactivate a PDCH on a non-PDCH timeslot */ testcase TC_pcu_deact_req_wrong_ts() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_deact_req(0, 0, 1); } @@ -4679,7 +4679,7 @@ function f_TC_pcu_ver_siXX(octetstring si, RSL_IE_SysinfoType rsl_si_type) runs on test_CT { var PCUIF_send_data sd; timer T:= 3.0; - f_init_pcu_test(); + f_init_with_pcuif(); /* Set SI13 via RSL */ f_rsl_bcch_fill_raw(rsl_si_type, si); @@ -4852,7 +4852,7 @@ * support dynamic timeslots? But it uses the same scheduler as osmo-bts-trx ?!? */ f_vty_config2(BSCVTY, {"network", "bts 0", "trx 0", "timeslot 3"}, "phys_chan_config TCH/F"); f_vty_config2(BSCVTY, {"network", "bts 0", "trx 0", "timeslot 4"}, "phys_chan_config TCH/F"); - f_init_pcu_test(); + f_init_with_pcuif(); } private function f_virtphy_common() runs on test_CT { @@ -4926,7 +4926,7 @@ var octetstring data; timer T; - f_init_pcu_test(); + f_init_with_pcuif(); f_init_l1ctl(); f_l1_tune(L1CTL); @@ -4982,7 +4982,7 @@ /* Send AGCH from PCU; check it appears on Um side */ testcase TC_pcu_data_req_agch() runs on test_CT { timer T := 3.0; - f_init_pcu_test(); + f_init_with_pcuif(); f_init_l1ctl(); f_l1_tune(L1CTL); @@ -5004,7 +5004,7 @@ /* Send AGCH from PCU; check it appears on Um side */ testcase TC_pcu_data_req_pch() runs on test_CT { timer T := 3.0; - f_init_pcu_test(); + f_init_with_pcuif(); f_init_l1ctl(); f_l1_tune(L1CTL); @@ -5027,7 +5027,7 @@ /* Send IMM.ASS from PCU for PCH; check it appears on Um side */ testcase TC_pcu_data_req_imm_ass_pch() runs on test_CT { var octetstring imm_ass := f_rnd_octstring(23); - f_init_pcu_test(); + f_init_with_pcuif(); f_init_l1ctl(); f_l1_tune(L1CTL); @@ -5050,7 +5050,7 @@ /* Send RACH from Um side, expect it to show up on PCU socket */ testcase TC_pcu_rach_content() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); f_init_l1ctl(); f_l1_tune(L1CTL); @@ -5091,7 +5091,7 @@ var GsmFrameNumber fn; var BIT11 ra11; - f_init_pcu_test(); + f_init_with_pcuif(); f_init_l1ctl(); f_l1_tune(L1CTL); @@ -5188,7 +5188,7 @@ /* Verify C/I (Carrier-to-Interference ratio) processing of PDTCH frames */ testcase TC_pcu_data_ind_lqual_cb() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); PCU.clear; f_init_l1ctl(); @@ -5217,7 +5217,7 @@ /* Send PAGING via RSL, expect it to shw up on PCU socket */ testcase TC_pcu_paging_from_rsl() runs on test_CT { - f_init_pcu_test(); + f_init_with_pcuif(); for (var integer i := 0; i < 100; i := i+1) { var MobileIdentityLV mi_lv; @@ -5262,7 +5262,7 @@ var float test_duration := 5.0; timer T; - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(0, 0, 7, true); PCU.clear; @@ -5316,7 +5316,7 @@ var float test_duration := 5.0; timer T; - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(0, 0, 7, true); PCU.clear; @@ -5388,7 +5388,7 @@ var float test_duration := 5.0; timer T; - f_init_pcu_test(); + f_init_with_pcuif(); f_TC_pcu_act_req(0, 0, 7, true); /* re-connect CTRL port from BTS to BSC */ -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/23464 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic95c46426ed3ac9ead645037059190fead181b31 Gerrit-Change-Number: 23464 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy at sysmocom.de> Gerrit-MessageType: newchange -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210323/68ab5f82/attachment.htm>