Help on building the OpenBTS / OsmoBTS Transceiver branch

[.]

Thanks, Craig, now it compiles successfully with this particular branch.

On July 22, 2021 5:59:02 AM GMT+03:00, Craig Comstock <craig at unreasonablefarm.org> wrote:
>I tried the instructions here:
>https://osmocom.org/projects/baseband/wiki/CalypsoBTS
>
>on a pretty clean and up to date Debian 10 vm and had no problems.
>
>I used the arm-none-eabi-* packages that come with Debian.
>
>arm-none-eabi-gcc --version
>arm-none-eabi-gcc (15:7-2018-q2-6) 7.3.1 20180622 (release)
>[ARM/embedded-7-branch revision 261907]
>
>Maybe you need to do some steps like
>
>$ sudo make uninstall
>$ make distclean
>$ git pull --rebase
>In libosmocore and libosmo-dsp?
>
>I used the fixeria/trx branch as mentioned in the wiki page above.
>
>-Craig
>
>> On Jul 21, 2021, at 5:42 PM, . <meursault at airmail.cc> wrote:
>> 
>> Hello,
>> 
>> I'm trying to build the transceiver branch for Calypso phones. I
>> installed all OsmocomBB dependencies (including libosmocore) and i
>> sucessfully built and installed libosmo-dsp from the Git repo. My ARM
>> toolchain is from here:
>>
>https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads
>.
>> 
>> When building, however, the compiler fails with:
>> 
>> arm-none-eabi-ld:
>> comm/libcomm.a(msgb.o):~/trx/src/target/firmware/comm/msgb.c:35:
>> multiple definition of
>> `tall_msgb_ctx';
>../../shared/libosmocore/build-target/src/.libs/libosmocore.a(msgb.o):(.bss+0x0):
>> first defined here Makefile.inc:135: recipe for target
>> 'board/compal_e88/hello_world.highram.elf' failed
>> 
>> I tried both sylvain/testing and jolly/testing branches.
>> 
>> What seems to be the problem?
>> 
>> Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20210722/e2e25949/attachment.htm>