This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
superben todaysaobe at gmail.comosmocom+c118+openbts send sms : youtube: https://youtu.be/r_U7DKFYuqo blog: http://gsmsuperben.blogspot.my/2016/07/osmocomc118openbts-send-sms.html First you need to successfully install osmocom: http://gsmsuperben.blogspot.my/2016/07/osmocombbc118-gsm-sniffer.html Assuming you have installed the gnu-arm-build.3.sh 1:Download and compile osmocomBB and libosmo-dsp $ git clone git://git.osmocom.org/libosmocore.git $ git clone git://git.osmocom.org/libosmo-dsp.git $ git clone git://git.osmocom.org/osmocom-bb.git $ sudo apt-get install libfftw3-dev libfftw3-doc When installing libosmocore execute ./configure many people will encounter No package 'talloc' found such a mistake , because they can not talloc, Here is the solution $ wget https://www.samba.org/ftp/talloc/talloc-2.1.7.tar.gz $ tar -zxvf talloc-2.1.7.tar.gz $ cd talloc-2.1.7/ $ ./configure $ make $ sudo make install install libosmocore $ cd libosmocore/ $ autoreconf -i $ ./configure $ make $ sudo make install $ cd .. install libosmo-dsp $ cd libosmo-dsp/ $ autoreconf -i $ ./configure $ make $ sudo make install Compile osmocombb $ cd osmocom-bb $ git checkout sylvain/testing $ cd src $ make HOST_layer23_CONFARGS=--enable-transceiver 2:Download openbts and install dependencies(The best use of root privileges) $ su $ apt-get install subversion $ svn co http://wush.net/svn/range/software/public $ sudo apt-get install autoconf libtool libosip2-dev libortp-dev libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang libreadline6-dev libncurses5-dev 3:install openbts $ cd pubilc $ cd a53/trunk $ make install $ cd openbts/trunk $ autoreconf -i $ ./configure $ make $ cd apps $ ln -s ../TransceiverRAD1/transceiver . $ cd .. $ sudo mkdir /etc/OpenBTS $ sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit" $ sqlite3 /etc/OpenBTS/OpenBTS.db .dump $ sudo mkdir -p /var/lib/asterisk/sqlite3dir 4:install sipauthserve in pubilc $ cd subscriberRegistry/trunk $ make $ sudo sqlite3 -init subscriberRegistry.example.sql /etc/OpenBTS/sipauthserve.db ".quit" 5:install smqueue in public $ cd smqueue/trunk $ autoreconf -i $ ./configure $ make $ sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit" 6:open all osmocom: $ osmocom-bb/src/host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/trx.compalram.bin transceiver: $ osmocom-bb/src/host/layer23/src/transceiver/transceiver ARFCN smqueue: $ public/smqueue/trunk/smqueue/smqueue sipauthserve: $ public/subscriberRegistry/trunk/sipauthserve OpenBTS: $ public/openbts/trunk/apps/OpenBTS $ public/openbts/trunk/apps/OpenBTSCLI 7:Configuration openbts OpenBTSCLI $ config $ config Control.LUR.OpenRegistration .* $ config GSM.Radio.Band 900 $ config GSM.Radio.C0 YOU transceiver ARFCN $ config GSM.Identity.MCC 001 $ config GSM.Identity.MNC 01 (001 01 test) Configuration is complete, reboot your openbts 8:Mobile search and access OpenBTS 9:View tmsis OpenBTSCLI $ tmsis 10:try send sms OpenBTSCLI $ sendsms YOUTMSIS number messege -- View this message in context: http://baseband-devel.722152.n3.nabble.com/osmocom-c118-openbts-send-sms-tp4026749.html Sent from the baseband-devel mailing list archive at Nabble.com.