This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
zhangseuedu zhangseuedu at sjtu.edu.cnPeter Gewald wrote > Am Samstag, den 19.10.2013, 01:17 -0700 schrieb zhangseuedu: >> And I pushed the red button >> after that but i can not see the output indicating that the phone is >> updating the firmware. > > I guess you have a self build seriel cable betweeen your phone and your > serial adapter? Check the cables in the plug, maybe they are too close, > so there could be a bypass. > > May also check rx/tx, there are some serial adapters that mixed up the > description on the harware. Hope this is helpful. > > Best regards, > Peter > > > > signature.asc (853 bytes) > <http://baseband-devel.722152.n3.nabble.com/attachment/4026185/0/signature.asc> Yes,the problem is that something was wrong with the cables in the plug. Now it works. Thanks a lot. Best regards, Wei -- View this message in context: http://baseband-devel.722152.n3.nabble.com/I-have-a-problem-when-load-the-firmware-tp4026182p4026186.html Sent from the baseband-devel mailing list archive at Nabble.com.