Osmocom Transceiver (was: Osmovom-BB on Raspberry Pi)

Dario Lombardo dario.lombardo.ml at gmail.com
Mon Feb 25 13:58:47 UTC 2013


This is what happens when using original motorola fw (logs from
openbts, cut where reported)

1361800521.515924 3073959680:
Starting the system...
transceiver: no process found
36
41
1
<0011> trx.c:419 TRX Control recv: |RXTUNE|897000|
<0011> trx.c:331 Setting C0 ARFCN to 35 (GSM900)
<0011> trx.c:220 TRX Control send: |RSP RXTUNE 0 897000|
<0011> trx.c:419 TRX Control recv: |TXTUNE|942000|
<0011> trx.c:220 TRX Control send: |RSP TXTUNE 0 942000|
<0011> trx.c:419 TRX Control recv: |SETBSIC|2|
<0011> trx.c:220 TRX Control send: |RSP SETBSIC 0|
<0011> trx.c:419 TRX Control recv: |SETMAXDLY|1|
<0011> trx.c:220 TRX Control send: |RSP SETMAXDLY 0 1|
<0011> trx.c:419 TRX Control recv: |SETRXGAIN|47|
<0011> trx.c:220 TRX Control send: |RSP SETRXGAIN 0 47|
<0011> trx.c:419 TRX Control recv: |POWERON||
<0011> trx.c:220 TRX Control send: |RSP POWERON 0|
<0011> trx.c:419 TRX Control recv: |SETPOWER|0|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 0|
<0011> trx.c:419 TRX Control recv: |SETSLOT|0 5|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 5|
<0011> trx.c:512 TRX Data 2348:0:0:abca74273bbd00fef0b5414bd71a00
[cut]
<0011> trx.c:512 TRX Data 2385:0:0:10aabdd500aefd7102ab75108bbd50
<0011> trx.c:419 TRX Control recv: |SETSLOT|1 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|2 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|3 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|4 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|5 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|6 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|7 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETPOWER|10|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 10|

system ready

use the OpenBTSCLI utility to access CLI
<0011> trx.c:512 TRX Data 2388:0:0:4b90da4280e504e8e00d00a204d060
[cut]
<0011> trx.c:512 TRX Data 2861:0:0:4421420408540070a810001a212280
<0011> trx.c:419 TRX Control recv: |SETPOWER|9|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 9|
<0011> trx.c:512 TRX Data 2949:0:0:811aa402902001ea40084681028040
[cut]
<0011> trx.c:512 TRX Data 4136:0:0:44a542052054286588022012a16200
<0011> trx.c:419 TRX Control recv: |SETPOWER|8|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 8|
<0011> trx.c:512 TRX Data 4184:0:0:abca74273bbd00fef0b5414bd71a00
[cut]
<0011> trx.c:512 TRX Data 4544:0:0:44a542052054286588022012a16200
ALERT 3063667520 TRXManager.cpp:93:clockHandler: TRX clock interface
timed out, assuming TRX is dead.
<0011> trx.c:512 TRX Data 4592:0:0:abca74273bbd00fef0b5414bd71a00
<0011> trx.c:512 TRX Data 4593:0:0:6193ebb006fec0f1895b448faaec90
<0011> trx.c:512 TRX Data 4594:0:0:37af2071c41b986e0c9a5218b14110
<0011> trx.c:512 TRX Data 4595:0:0:a01acc5b9814c67a7832b353421a10
Aborted (core dumped)


On Mon, Feb 25, 2013 at 2:35 PM, Sylvain Munaut <246tnt at gmail.com> wrote:
>> That's obvious.
>
> I would think so, but from the logs, it really looks like the same
> phone is trying to act as both.
>
> Try not using 'mobile' at all and just use any plain old phone. (or
> the phone with its original firmware).
>
> Cheers,
>
>     Sylvain




More information about the baseband-devel mailing list