This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Craig Comstock craig_comstock at yahoo.comSo I looked and there seem to be two board layouts involved here. The one's with the Intel flash seem to work fine. The others that have the MemoCom? flash don't work. The one's with MemoCom are missing several test points visible from the battery compartment as visible on the images on the webpage: http://bb.osmocom.org/trac/wiki/MotorolaC140 So maybe there is something different about these other C140 that makes them not work with osmocon. I get: pi at raspberrypi ~/osmocom-bb/src/host/osmocon $ ./osmocon -d tr -p /dev/ttyUSB0 c140 ../../target/firmware/board/compal_e86/hello_world.compalram.bin got 7 bytes from modem, data looks like: 66 74 6d 74 6f 6f 6c ftmtool Received FTMTOOL from phone, ramloader has aborted got 1 bytes from modem, data looks like: 65 e got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 66 f got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6d m got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6c l -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20130822/cd99b0c5/attachment.htm>